Fortinet 50E Slowing down internet throughput

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • the Benninger
    Senior Member
    • Nov 2022
    • 189
    • venezulan

    #21
    Hi folks

    Recently Fortinet seems to change the firmware download policy,If the warranty has passed,Even if you are a member,Can't download firmware,Just one of the 110Cs in hand recently is a bit abnormal,Firmware needs to be repainted,But can't find the dilemma that the firmware can download。After asking the manufacturer for help, I finally got a firmware,Then, go online and search for the firmware file that can be found,Stay here as a spare,It is also provided to emergency friend

    mon2
    Thanking you for the help you have offered me selflessly and to everyone in general, I can offer you the update file. I don't have them all, but I do have most of them and in the latest available versions. However, I would have to do it by logging into the firewall. If it's possible to log in, I would recommend making a backup of all the configurations first and then re-uploading after the update.


    I hope it's not too late, one last thing, is there a way to restore it to factory settings from the hardware! Be careful, this will erase all existing configurations and parameters. It goes like this: disconnect the power supply, press and hold reset button with a clip, then connect the power supply and keep holding the reset button for 10 seconds. Remove the clip and wait about 5 minutes for it to complete. (HardReset)


    Once it is restored in a browser, type the default address; in my case it is (192.168.1.99) which could vary depending on the country, the default user is (admin) and the password is left blank.


    I sincerely hope it helps you.
    Attached Files
    Last edited by the Benninger; 05-15-2025, 12:15 PM.

    Comment

    Related Topics

    Collapse

    • harp
      piezo worn out issue
      by harp
      I wonder if it is real, or missleading some other problem? ?............... https://m.youtube.com/watch?v=ceb09rxPohA ?....... in video is presented claims that new piezo fix problem of poor production of moist, what is electronic science stand behind that conclusion? Can piezo be worn out and hot to tested it for that condition.............. in the past I see video where is piezo torturing through test vith high voltage, various frequency, and it is amazing what can survive and operate after damaged.
      10-13-2024, 03:40 PM
    • Document Archive
      AD7276, AD7277, AD7278, AD7274, AD7273​ Datasheet
      by Document Archive
      AD7276, AD7277, AD7278, AD7274, AD7273

      The AD7276, AD7277, AD7278, AD7274, AD7273 are 12-bit/10-bit/8-bit, high speed, low power, successive approximation analog-to-digital converters (ADCs), respectively. The parts operate from a single 2.35V to 3.6V power supply and feature throughput rates of up to 3 MSPS. The parts contain a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 55 MHz.

      The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors...
      10-07-2024, 05:32 AM
    • TrumanHW
      A1708 13 MacBook Pro Fn WiFi stops working | Turn OFF-ON WiFi = Temp Fix (1-6 min)
      by TrumanHW
      WiFi menubar symbol shows hardware stays connected (even when issue occurs)
      WiFi adapter shows normal connectivity symbol & stats: Using Opt+WiFi shows:

      • Tx Rate: 867 Mbps
      • RSSI: -44 dBm
      • Noise: -90 dBm (same as working MBP connected to same router)

      After ~1 min - 7 min, connectivity is lost (no traffic works) until I Disable / Enable WiFi (temporarily fixing again)

      Inspected Antenna connections (look secure) & UP / DL is quick when working (same as good laptop)
      • DL = ~400 Mbps
      • UL = ~17 Mbps...
      09-06-2022, 10:45 AM
    • psinh99
      Need bios MSI Modern 14 C11M
      by psinh99
      I need bios ok or help me rebuild my dumb bios.
      My dumb bios not turn on.
      Thank advance
      MSI Modern 14 C11M
      Board code: MS-14J31
      S/N: The label on the bottom of the machine is worn and cannot be read.
      ​...
      05-20-2025, 02:21 AM
    • spleenharvester
      Reverse engineering of 18650 4-channel tester
      by spleenharvester
      Hi friends

      I have reverse engineered this tester, schematic is attached and is complete except for capacitor values. These testers annoyingly have no model number but they are the ones you find on the first page of just about any website if you type in "18650 4-channel tester". There is also a 2-channel variant and a newer 8-channel variant. They are very cheap (about £15) and can measure voltage, current, internal resistance and capacity. They have a multicolour display for all these statistics. They also have terminal blocks so that if you want to use a breakout board...
      05-04-2025, 02:43 AM
    • Loading...
    • No more items.
    Working...