Philips 258B6QUEB/00 LCD monitor no power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • peterzz2007
    Member
    • Nov 2021
    • 19
    • Slovakia

    #1

    Philips 258B6QUEB/00 LCD monitor no power

    Hello all,i`v got dead monitor,board model 715G8068-M0F-000-005I.
    There is 19V and 5V present on board where external power supply is connected,Enable and Dim signal is no present.
    I measured voltages and resistance on coils present on the main board,pls. take a look.
    Front LED just blinks for a split of the second when PS is connected.
    Attached Files
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8118
    • Canada

    #2
    Re: Philips 258B6QUEB/00 LCD monitor no power

    Its probably the main IC under the heat sink that’s the problem.

    Comment

    • peterzz2007
      Member
      • Nov 2021
      • 19
      • Slovakia

      #3
      Re: Philips 258B6QUEB/00 LCD monitor no power

      Hello,probably,resistance on coil leads to main ic is quite low.
      I don`t have working board to compare the values,maybe it is normal

      Comment

      Related Topics

      Collapse

      • Dani_2024
        Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
        by Dani_2024
        Hi and thanks in advance for any input you might provide!
        I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
        Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

        Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
        10-28-2024, 05:06 PM
      • PantherDave
        Microsoft Surface Pro (5th gen) model 1796 - no power
        by PantherDave
        Hi all!

        I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

        I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
        https://www.badcaps.net/forum/troubl...-hardware-devi...
        05-29-2024, 02:01 PM
      • mikey5791
        Philips 196V3L monitor power led off
        by mikey5791
        Hi, i was given this lcd monitor last week with the issue of power led blinking. Upon checking the power board, i found 2 pieces electrolytic caps bulged and replaced them.
        Later, when i switched on ac power and detected 5v and 15v dc at output pins. But as soon as i pressed on the front power button, the led on power button lights for 1 second and it turns off.

        So, i tried disconnect the flex ribbon cable from t con board. But all i got is a white screen with nothing on. I suspect there is something short somewhere that prevent the display being turned on. Can someone with...
        01-25-2024, 07:52 PM
      • GLISIT
        Asus Probook P5440UF-XB74 power issue
        by GLISIT
        Hi all,

        TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


        I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

        A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
        01-16-2025, 02:29 PM
      • JDC
        (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
        by JDC
        ONN 100012588
        Issue: No Power, Then Rebooting After Main Board Change

        Short answer: replace main board and power board
        Technical answer: replace main board and Q306 & Q307 on power board.

        Long answer:

        TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
        07-15-2022, 07:39 AM
      • Loading...
      • No more items.
      Working...