2493HM problem

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • satoshi
    Member
    • Jul 2010
    • 13
    #21
    Re: 2493HM problem

    yeah ? i forgot to tell u guys that the monitor i bought it from eBay and it was refurbed
    thnxs again. Besides the monitor cant be repaired if the chip is broken. Only board replacement

      Comment

      • satoshi
        Member
        • Jul 2010
        • 13
        #22
        Re: 2493HM problem

        I managed to fix my 24" monitor !! Yeah !!!!!!



        It was the PCB !
        I shouldnt cancel the first purchace
        Anyway the other one had all 3 boards + the chassy inside.
        I got them today. I was amazed that he shipped me the logic,the PCB, the Inverter and the chassy together !!!

          Comment

          • lucky13
            Badcaps Veteran
            • Aug 2007
            • 412
            #23
            Re: 2493HM problem

            Satoshi,

            Consider yourself very, very lucky.

            So which board did you change?

              Comment

              • satoshi
                Member
                • Jul 2010
                • 13
                #24
                Re: 2493HM problem

                Power board i said it before, PCB xD

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • m1ch43lzm
                    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                    by m1ch43lzm
                    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                    05-12-2025, 08:37 PM
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    ORIGINAL POWER SUPPLY BOARD
                    7 Photos
                    11-22-2024, 01:46 PM
                  • howardc64
                    A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                    by howardc64
                    Problem

                    This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                    08-04-2024, 10:36 PM
                  • jb_Bak
                    Sony xbr-65x900c main board issues?
                    by jb_Bak
                    Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                    Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                    Power Board Connector that goes to Main board
                    CN6401
                    Pin 01 NC
                    Pin 02 NC
                    Pin 03 "BL_ON": 0V
                    Pin 04 "N/C"
                    Pin 05 "STBY 3.3V": 3.5V
                    Pin 06 "GND": N/C
                    Pin 07 "AC_OFF"...
                    09-27-2021, 04:52 PM
                  • Rayblaster
                    HP RP7 RP7800 from 2012/2013 worst fault - has "character"
                    by Rayblaster
                    Hello friends, I've got a nice toy to play with - it is an HP RP7800 All-in-one POS system. I got it for free and it has one problem - it turns on very rarely, and just for a few seconds. After that it dies and doesn't come on if I don't leave it unplugged for at least 2 hours. I've repaired motherboards before, this is not my first one, but problem with these types of faults is that everything you check on the board will usually be fine. This is the case for me here.

                    I dissassembled it completely, and got my hands on the motherboard. Model No. is PIQ67H/Higgins 11047-I 48.3GD02.011....
                    12-30-2024, 06:28 PM
                  • Loading...
                  • No more items.
                  Working...