Hansol H711

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #1

    Hansol H711

    Case history. Hope it helps someone.

    Hansol H711
    ===========
    - made in Jan 2003
    - LCD panel by Samsung
    - power supply is built into base/stand (DC 12V, 3.35A)

    Symptoms
    ========
    - no power on
    - no LED light

    Component Replaced
    ==================
    - 680uF 16V capacitor in power supply base/stand (see pic)

    Comments
    ========
    - taking apart base/stand is a bit of a pain, must separate plastic stand to get access to screws (see pic)
    - power supply part is protected by aluminum shield which is welded shut (see pic)
    - only 2 screws to take apart flat panel, easy to pry apart afterwards
    - no plug and play support in Windows XP
    Attached Files
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---
  • Dgtech
    E. Technician
    • Apr 2009
    • 1462
    • Steeler

    #2
    Re: Hansol H711

    Your typed message under the picture didnt come out right. However, the 680 uF cap looks bulged a little and check the black (round) fuse right next to the main power connector (F1 on the solder side).
    Last edited by Dgtech; 05-22-2010, 09:10 AM.
    The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

    Comment

    • BlairR9270
      New Member
      • Oct 2014
      • 3
      • USA

      #3
      Re: Hansol H711

      Sorry old post, But I had a H711 burn up on me last night. It was actually a very small transistor on the top circuit board behind the screen. I thought it might just be a resistor until I opened it up. It's complete junk now. But I did get my money's worth from it. I gamed with it since 2005. It has seen many Rigs too. However it was time to change it anyway, I should have got a new 1080p monitor when I built my latest rig.

      Comment

      Related Topics

      Collapse

      • sam_sam_sam
        Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
        by sam_sam_sam
        I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

        One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
        03-31-2024, 02:12 PM
      • sam_sam_sam
        Modification to a ZD-987 desoldering/soldering station using a external switching power supply
        by sam_sam_sam
        I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

        I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
        07-01-2024, 06:34 AM
      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • howardc64
        A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
        by howardc64
        Problem

        This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
        08-04-2024, 10:36 PM
      • JimBanville
        Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
        by JimBanville
        The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
        Opened it up and discovered the power supply is making a faint clicking or ticking sound.
        I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
        I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
        09-13-2023, 07:21 AM
      • Loading...
      • No more items.
      Working...