Comments on repairing HP ZR2440w LED backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RrnR
    New Member
    • Jul 2014
    • 4
    • New Zealand

    #1

    Comments on repairing HP ZR2440w LED backlight

    I have several of these around the place and I like them, mainly because they run cool, which I figure translates into a longer life. Anyway I have one that has developed a dark area on the screen (see pic). I assume that this is due to a failure of some LED strip in the panel.

    So my question:

    Assuming that a dud section of LEDs is the problem, does anyone have any experience with replacing these?
    Attached Files
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14021
    • Canada

    #2
    Re: Comments on repairing HP ZR2440w LED backlight

    https://www.badcaps.net/forum/showth...hutdown%20mode.

    Comment

    • RrnR
      New Member
      • Jul 2014
      • 4
      • New Zealand

      #3
      Re: Comments on repairing HP ZR2440w LED backlight

      Hi, thanks for the reply. I had seen that post, but it seemed to deal more with capacitor issues, which I figured was unlikely to be the cause as that fault would tend to affect all the LEDs.

      I saw somewhere (I think) that these panels are put together in such a way as to make replacement of the LEDs difficult and I was looking for someone who could advise about that before I strip the thing down.

      Comment

      Related Topics

      Collapse

      • triplefour
        UN65TU700DF picture and sound but no backlight. BL tests ok but repl. PSU didnt fix!
        by triplefour
        this tv is throwing me for a loop. do samsung tvs no longer have the backlight self test feature built into the power supply?
        i tested the backlight with my LED tester and it lights up both strips. one of them reads 100v and the other reads 63.7v.
        unplugged mainboard from power supply but left backlight plugged in, and then plugged psu wall power in. expected to see backlights light up but see nothing.
        according to how ive diagnosed in the past, this would almost always be a bad power supply. replacement power supply was cheap like 20$ from ebay. but still i get not even...
        09-13-2023, 10:43 PM
      • hollox123
        ASUS ROG Strix G713QR - Keyboard, backlight and side LEDs don't work
        by hollox123
        Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:

        1. Laptop keyboard doesn't work
        2. The backlight on the laptop keyboard doesn't work
        3. The x2 side LEDs (red) on the laptop don't work

        The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.

        I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.

        But I am strongly aiming that it is somehow a BIOS-related problem,...
        05-11-2025, 08:05 AM
      • signal.quest
        Panasonic LED TV TC-40A420U - Replaced Backlight LEDs but now no image/display or garbled
        by signal.quest
        I have a Panasonic LED TV TC-40A420U. The TV was given to me as an attempt to fix or throw out. I replaced the Backlight LEDs and now the screen lights up, but there is no image/display. If I play with the up/down buttons I can get the display to change from black to garbled. I can't get sound from HDMI but not sure of what input is selected. I have no remote control. When I connect a laptop to the HDMI ports it recognizes a Panasonic TV for display and sound output but I can't see or hear anything through the TV. This makes me think the mainboard is OK, but not sure if mainboard can...
        03-17-2024, 10:14 AM
      • DanPoka
        Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
        by DanPoka
        I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
        Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
        This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
        02-15-2025, 05:05 AM
      • Comp_Pro
        No Backlight Macbook A1990 820-01041
        by Comp_Pro
        Hello all,

        Am trying to figure out this backlight issue with this A1990 Macbook Pro.

        Tests performed:

        There is no backlight even with a good screen.
        Backlight IC is receiving the correct support voltages.
        Fuse F8400 ok
        Current sense resistor R8400 ok
        Backlight IC is receiving 3.3V on enable pin.
        Backlight IC receiving voltage from PPBUS_G3H, aprox 12.5V.
        Backlight IC receiving 5V from PP5V_G3S
        Backlight IC BKLT_SCL and BKLT_SDA both measure 0.545V diode mode to ground
        I2C_BKLT_SCL and I2C_BKLT_SDA both measure...
        05-06-2024, 10:23 PM
      • Loading...
      • No more items.
      Working...