ASUS TP500L No backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • spivey76
    New Member
    • Aug 2017
    • 7
    • US

    #1

    ASUS TP500L No backlight

    I was replacing the glass LCD on a ASUS TP500 when the backlight went. I can still see a faint image by shining a flashlight on the screen and the HDMI works for mirroring the display. While looking at the mother board I found what's in the picture. Is this a fuse or resistor? I get fluctuating numbers when I measure it which is why I'm not sure.

    Also does anyone know where any other fuses are located on this board? Model number on the board says TP500LN Rev 2.0.
    Attached Files
  • 1supertech
    Badcaps Veteran
    • Apr 2012
    • 384
    • USA

    #2
    Re: ASUS TP500L No backlight

    Identification is printed on the board R Plus a number is a resistor

    Comment

    • spivey76
      New Member
      • Aug 2017
      • 7
      • US

      #3
      Re: ASUS TP500L No backlight

      That's what I was hoping to see, but (as in the picture) it isn't labeled. Or is it and I'm missing it? That is a resistor correct? So I can't just bridge it to test?I've also attached a shot of the opposite side of the mother board, the parts in question are directly below the video connector.
      Attached Files

      Comment

      • 1supertech
        Badcaps Veteran
        • Apr 2012
        • 384
        • USA

        #4
        Re: ASUS TP500L No backlight

        Usually A SMD resistor has a number on top with a resistor calculator you can determine the ohms rating
        I use resistor calculator app on my phone.
        Last edited by 1supertech; 08-23-2017, 09:21 AM.

        Comment

        • spivey76
          New Member
          • Aug 2017
          • 7
          • US

          #5
          Re: ASUS TP500L No backlight

          So can I assume its a fuse then? When I measure it I don't get an open like a traditional failed fuse, but the meter also jumps around and never settles on a small range ( I don't have a small set of probes either, just standard size).

          Comment

          • Udemzy
            Senior Member
            • May 2017
            • 151
            • Guatemala

            #6
            Re: ASUS TP500L No backlight

            That's an smd capacitor, just remove it, use sodding iron with LED to cover the surface and you're good to go.

            Comment

            • spivey76
              New Member
              • Aug 2017
              • 7
              • US

              #7
              Re: ASUS TP500L No backlight

              Originally posted by Udemzy
              That's an smd capacitor, just remove it, use sodding iron with LED to cover the surface and you're good to go.
              Just any SMD LED to bridge the connection? Can I just bridge it with solder?

              Comment

              • spivey76
                New Member
                • Aug 2017
                • 7
                • US

                #8
                Re: ASUS TP500L No backlight

                Originally posted by Udemzy
                That's an smd capacitor, just remove it, use sodding iron with LED to cover the surface and you're good to go.
                Actually are you referring to the black component with a hole in it or the brown one?

                Comment

                Working...