LG Ultra-Fine 5K 27MD5KA-B or 27MD5KB-B PCB LM6FB EAX67089605

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Comps&Cons
    Member
    • Mar 2020
    • 13
    • United Kingdom

    #1

    LG Ultra-Fine 5K 27MD5KA-B or 27MD5KB-B PCB LM6FB EAX67089605

    Re-Posted
    Hi to all.
    I hope this helps someone.
    Complete firmware from all EEPROMs on this LG Display
    I'm posting this here on its LG PCB title to make it easier to find​
    Attached Files

Related Topics

Collapse

  • TheUser
    Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
    by TheUser
    Hello to everyone ,

    This is my first post here, and i would like to share with you a small story in case you can help me.

    Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

    All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

    I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
    02-10-2024, 02:07 PM
  • zklgfs
    Anker SoundCore 2 Bluetooth Speaker Turns Off After a Few Seconds (Possibly Firmware Issue?)
    by zklgfs
    Hi,

    I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...
    08-11-2025, 02:14 PM
  • gurj1979
    Ubiquiti firmware help. US-8-150W POE
    by gurj1979
    Hi guys.

    I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
    Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

    So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
    Got New chip and writes good.

    THE PROBLEM...
    It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

    Does anyone have a Good Firmware I can have?...
    07-22-2024, 05:13 PM
  • Daniel Larsson
    Firmware file for LG SK10Y Soundbar stuck in Please wait loop needed
    by Daniel Larsson
    Hi,

    My LG Soundbar, SK10Y, has somehow ended up in an endless "PLEASE WAIT" loop and I am now starting to suspect that the firmware is causing this, and I can't manage to connect via the app to push a new firmware in as it never really starts.


    I can trick it to start via HDMI ARC and it actually starts up, flashes OPTICAL and then goes to ARC where the sound (including sub) is perfect, but the white led indicator keeps blinking and after 20 seconds it says "GOOD BYE" and shuts down.
    During these seconds the function button is not working...
    08-13-2025, 10:29 AM
  • skynetto
    MSI Z590 MS-7D07 rev 2.1 EC Firmware
    by skynetto
    Hello there.
    I have this mainboard (MSI Z590 Gaming edge - MS-7D07 rev 2.1) with these symptoms.
    1. SIO_3VA ON
    2. ATX_5VSB ON
    3. 3VDSW ON
    4. Mainboard stucked in Deep_S5 state

    Problem:
    RSMRST Incative. (Obviosly everything dead)


    Tried just for fun to update the BIOS with its Bios flashback function (Push button and USB stick with bios in it).
    Main Bios restored succesfully.
    When updating Bios all the voltages comes on except PCH which is not needed.

    EC Controller: NCT6687D-M
    External SIO Firmware...
    03-17-2023, 10:30 AM
  • Loading...
  • No more items.
Working...