I have a question If I were to buy non working LCD monitors in bulk such as by the pallet, what is a good price to pay. I'm thinking $5.00 each
what do you think ?
what do you think ?
-
-
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file --- -
Re: Buying non working lcd monitors in bulk
Tough call as this type of stuff sold through auctions has a lot of different size/brands mixed in. Best if there's a manifest ( if the pallet is wrapped in clear plastic where you can't identify anything) that gives you how many of each make/model are included. Even if there's no manifest and you see what you're getting, you can't pretest them, so you may be getting non repairable junk that may include monitors with bad screens, missing boards, etc. Always a crap shoot when you purchase this type of stuff.Comment
-
Re: Buying non working lcd monitors in bulk
I have been buying non working monitors for $5.00 for 17" thru 20" from individuals.
but I would like to find a wholesaler that would sell me 25 monitors at a time.
It is a crap shoot but so far I am a head of the game. I have repaired 40 monitors
and had 6 non repairable.
Thanks for your reply retirecap,jetadm123Comment
-
Re: Buying non working lcd monitors in bulk
I think it all depends on how much you can sell them for afterwards. Where I live, you'd have a hard with selling the 17" monitors even if you were to give them out for free.Comment
-
Hello,
i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
Never ever i experienced problems with that.
Now i have one 5050sff machine, where this jumper isnt working at all.
I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?
The history of the machine is that i used it in my office... -
Hi,
I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
The board is generally working now, all PCIe ports are working, Windows installs normally.
However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA... -
Hi i have one Macbook Air 2020 where touch ID is not working (it's not scanning fingerprints). Touch ID was working before, there is no error message during scanning fingerprint it's just not scanning on screen you can see only fingerprint but there are no red updates as when it's working. Power button is working fine.
I've checked boardview and also schematics but i'm not able to find anything related to TouchID ... i have similar issue on a2338 where there was problem with PP3V0_TOUCHID and after replacing UT610 it was working but here i'm not able to find anything related to... -
Hi masters, I need your help.
I am working on Lenovo Legion 16ITHg6
Motherboard number NM-D721, no BV, no schematic but I am attaching very closes ones.
INPORTANT: My motherboard version is with IT8258 IC, that is controlling keyboard and RGB LEDs.
My problem is on UI142, +3VALW_AG is not stable, floating from 0V to 3,3V.
AGKB_PWR_EN_N signal is floating too (that is why+3VALW_AG not stable).
Power LED is not working as well, power button working well.
UI26 ??? is there any firmware too? Powered by +3VALW_AG.
Motherboard...05-04-2025, 09:35 AM -
This specification for the ALIENWARE Aurora R7 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Aurora R7 boardview and Aurora R7 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for ALIENWARE Aurora...09-12-2024, 03:36 PM
Comment