CTX S961A monitor

[budm]

Re: CTX S961A monitor

The fuse is blown.

[flash0429]

Re: CTX S961A monitor

stupid me ok so i have to change that out before we can figure out wats wrong with the monitor............ wheres the best place to get one

[budm]

Re: CTX S961A monitor

Mouser or Digikey, there should be printing on the top of the fuse for the current and the voltage rating on it. I would use DIGIKEY because they will shipp small order through USPS for about $2.50.

[flash0429]

Re: CTX S961A monitor

is that the only way to get them is online its a 15A 250V fuse radioshack doesnt care them

[budm]

Re: CTX S961A monitor

I do not think that fuse will be rated at 15A! Please show the picture of the fuse, some time they will also print the fuse rating on the circuit board also.

[flash0429]

Re: CTX S961A monitor

heres the pics


edit: i think i was thinking the T3 was separate but now that i look at it i think it goes with the current which makes it a 3.15A

[budm]

Re: CTX S961A monitor

That is more like it, 3.15A 250VAC. Does it have T in front of the 3.15A? If it does, then that will be time-delayed type fuse, not a fast-blo type fuse. Ah, it does have T- infront of the 3.15A

[flash0429]

Re: CTX S961A monitor

ya theres a T there

[budm]

Re: CTX S961A monitor

http://www.mouser.com/ProductDetail/...99u%252bsgw%3d

You need to check the bridge rectifier also to see if it is damaged or not.

[flash0429]

Re: CTX S961A monitor

ok i will order the part and when i replace it i will be back to continue figuresing out the rest of the monitor

[selldoor]

Re: CTX S961A monitor

Fuse is blown remove ,re check it just to make sure then replace with new - might as well buy a few?