Hanns_G HG281D with flashing/blinking screen problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Barq
    Member
    • Jun 2011
    • 39

    #61
    Re: Hanns_G HG281D with flashing/blinking screen problems

    Well guys Im back. I decided to call Hanns-G and they are going to honor the warranty on parts and labor even though I have opened the case and fiddled around. I was amazed by thier willingness to help me when I explained that I thought it was not under warranty anymore and I was wondering wahat parts would cost they took my info and decided to honor the warranty which was actually 3 years not 2 as I thought.. So I am going ot send it back and get it fixed as I have way to many other alternative energy projects going on to make time for this. I wil however, be sure to post back and let you know what they came up with as far as what was wrong. btw I told them that i had opened it and that I had worked in a tv shop when I was young and was going to fix it so they wrote the rma up as me having been a tech. so warranty not voided for opening the case. A trick some one might want to remember in the future. All in all I they were anxoius to keep me as a customer in the future and I was surprised at the courtisy. If I get it fixed and all I pay is shipping I will defenately recommend them to other in the future. I like corps. that care about customer satisfaction. Thanks for all the help from what I can see you guys are busy with a crud load of others with bad viewsonics. You guys are the best.

    Comment

    • herbal718
      New Member
      • Sep 2012
      • 5
      • USA

      #62
      Re: Hanns_G HG281D with flashing/blinking screen problems

      I'm sorry to bump this old thread. I have the same exact problems as Barq posted, same monitor. However my monitor is past it's warranty phase. I was wondering if any moderator could send a message to Barq asking if he knows what they fixed.

      I did have the monitor apart and inspected all the caps, they are in good condition and I suspect they are dry caps. I need to run some voltage tests on them as soon as I can I'll try to get the info here, again I'm sorry that I bumped this old thread instead of starting my own, as the symptoms matched exactly my own I figured it would be a good to continue the discussion in this thread. I will try and get all the info and pictures in the coming days up in this thread, if that's an issue I'll start a new one.

      Comment

      Related Topics

      Collapse

      • STKR123
        Elitebooks (820, 840 etc. all gens) and those continuously flashing Power LED + flashing CapsLock LED
        by STKR123
        As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
        I wonder if re-flashing the BIOS might be of any use here.

        As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.

        There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,...
        11-03-2024, 06:58 AM
      • JDong
        Problems flashing BIOS for supervisor locked Lenovo V15 G4 IRU 831A laptop
        by JDong
        There was an error... Aborting......I'm using another Linux Laptop with Zorin OS...to try and patch my Lenovo V15 G4 IRU with above specs....It originally had Windows 10/11 installed and converted to a dual boot Kali OS/Parrot OS system. I may have used the wrong lenovo_autopatcher_0.2 (I believe was posted by @knucklegrumble....I am out of ideas and flat broke so i cannot afford another fix (spent it all as an e-com entrepreneur does) any help from anyone would be GREATLY appreciated.....
        • Laptop Model: Lenovo V15 G4 IRU
        • Issue: Forgotten supervisor password.
        • BIOS Chip: GD25B128E (or GD25B128B
        ...
        07-06-2025, 10:18 PM
      • learnmore
        Samsung QE55Q60TAUXXU - flashing backlight and flashing standy light--no image
        by learnmore
        Hello Community!

        CASE DETAILS

        Promblem Signs: Backlight on 1 sec off 7sec > repeat && Red standby light: 1blink, off 3 sec, 2 blinks, off 5 secs, 2 blinks, off 3 sec, restart cycle

        13V present on powerboard output. Backlight continues flashing after removing cables to pannel one at a time and even with both disconnected. NOTE: backlight STOPs flashing and remains on when connector between powerboard and mainboard (note Tcon built in) is disconnected.

        Tried inserting firmware on USB and left it in for a few hours, but no change
        ...
        03-03-2024, 09:49 AM
      • HTR-Informatique
        Dell G3 15 3500 - Battery bug (black screen and flashing keyboard backlight)
        by HTR-Informatique
        Hello,

        YouTube video of the problem encountered: https://youtube.com/shorts/q7TLNv36LUo

        I am a pro and I have a problem that I have never seen despite my 7.5 years of experience on my own and my thousands of repairs, on a customer's Dell G3 15 3500.

        On this PC I have already changed the complete palmrest because the keyboard was no longer working properly.

        I also changed the screen because the PC fell and the screen was broken.

        I changed the battery with a new and original battery.

        I also had corrosion/oxidation on the...
        02-09-2025, 06:51 AM
      • Exim
        ASRock N100M, no picture no boot, but semi-alive
        by Exim
        Hi guys,
        I managed to semi-kill an ASRock N100M board after updating Bios from 1.10 to 2.01. It's a zombie now, dead, but not dead.

        ASRock N100M special features:
        - CPU soldered to board, small Intel 12th gen
        - iGPU
        - four POST LEDs

        Problem after updating Bios to 2.01 using the in-Bios update tool: no picture, no boot.
        I am not sure anymore if it booted at least once successfully after updating the bios to 2.01, maybe not, I can't remember. I think it did not.

        Symptoms:
        - no picture/signal on any of the display connectors,...
        04-01-2025, 02:36 PM
      • Loading...
      • No more items.
      Working...