Re: Hanns-G HG281D, LCD Monitor no power

I want to replace the following caps on my logic board. Can anyone recommend the replacement caps? They are all from the same manufacturer and series.

[url]http://www.gjt.net.cn/products/105-1.htm[/url]

GJT 105 C (M)
470 uf, 16v
100 uf, 16v
10 uf, 25vRe: Hanns-G HG281D, LCD Monitor no p...05-1.htm[/url]

Re: Hanns-G HG281D, LCD Monitor no power

Is there a good way to find out the exact measurements of these capacitors that I want to replace? I believe mine are manufactured by Willawake judging by pictures from another thread. Should I go with Rubycon over these Panasonic ones? I'm looking at these Rubycon ones on Digikey, most are PX series with not so great lifetime expectancy. I guess that I can order most of these from badcaps and the ones you don't have I'll grab off digikey.

Re: Hanns-G HG281D, LCD Monitor no power

I found a bunch of these capacitors, the only difference I can spot among them is that they have different Ripple Current (mA) and Impedence (Ohm). Should I go with Rubycon caps instead of these Panasonic ones?

[url]http://www.digikey.com/product-detail/en/EEU-FC1H100/P11250-ND/356152[/url]
[url]http://www.digikey.com/product-detail/en/EEU-FC1H100L/P10316-ND/266325[/url]Re: Hanns-G HG281D, LCD Monitor no p...that they have

Re: Hanns-G HG281D, LCD Monitor no power

I have this same board and would like to replace all the capacitors in this picture. Would someone be able to find the right ones for me on digikey? I don't want to make a mistake and order the wrong ones. I am guessing to go with the Panasonic ones, or are there better ones, any help will be greatly appreciated, thank you....

Re: Hanns_G HG281D with flashing/blinking screen problems

I'm sorry to bump this old thread. I have the same exact problems as Barq posted, same monitor. However my monitor is past it's warranty phase. I was wondering if any moderator could send a message to Barq asking if he knows what they fixed.

I did have the monitor apart and inspected all the caps, they are in good condition and I suspect they are dry caps. I need to run some voltage tests on them as soon as I can I'll try to get the info here, again I'm sorry that I bumped this old thread instead of starting...