Re: Dell 3008wfp faulty power supply
Thank you again selldoor.
What i've noticed is that with DMM set to 1Mohms or 10Mohms range, i get a reading across 1-2 and 2-3 regardless of the polarity of my leads.
On 1Mohms range i get :
1-2 and 2-3 0.017Mohm
1-2 and 2-3 0.029Mohm Reversed leads
On 10Mohm range i get :
1-2 and 2-3 0.02Mohm regardless of lead polarity
I don't see this on lower ohm ranges.
Cheers
Thank you again selldoor.
What i've noticed is that with DMM set to 1Mohms or 10Mohms range, i get a reading across 1-2 and 2-3 regardless of the polarity of my leads.
On 1Mohms range i get :
1-2 and 2-3 0.017Mohm
1-2 and 2-3 0.029Mohm Reversed leads
On 10Mohm range i get :
1-2 and 2-3 0.02Mohm regardless of lead polarity
I don't see this on lower ohm ranges.
Cheers
Comment