The 2 Viewsonic X1940W LCD monitors I bought as a dual monitor set are both not working. They are still underwarranty but I could'nt help myself I had to take one apart. I could use some help getting the right caps ordered.
I tried mouser and digikey but gave up. I'd prefer to just order from badcaps.net but here too I run into a roadblock with exact matches.
I'd like to know what I can safely use to replace the following caps. Also, can anyone tell me how does one remove the epoxy glue inorder to de-solder?
Pictures are attached.
C1
CapXon
GF105
P735 vent
220μF 35v
D=10mm x L=12mm x LEAD SPACE=5mm
C302
CapXon
GF105
P735 vent
220μF 35v
10mm x 12mm x 5mm
C305
CapXon
GF 105 c
P735 vent
2200μF 10V
13mm x 18mm x 5mm
C307
CapXon P735 vent
KF 105c
1000μF 10V
8mm x 20mm x4mm
C205
KF105 P733
50V 22μF
5mm X 8MM x 3mm
Thanks,
Warren
I tried mouser and digikey but gave up. I'd prefer to just order from badcaps.net but here too I run into a roadblock with exact matches.
I'd like to know what I can safely use to replace the following caps. Also, can anyone tell me how does one remove the epoxy glue inorder to de-solder?
Pictures are attached.
C1
CapXon
GF105
P735 vent
220μF 35v
D=10mm x L=12mm x LEAD SPACE=5mm
C302
CapXon
GF105
P735 vent
220μF 35v
10mm x 12mm x 5mm
C305
CapXon
GF 105 c
P735 vent
2200μF 10V
13mm x 18mm x 5mm
C307
CapXon P735 vent
KF 105c
1000μF 10V
8mm x 20mm x4mm
C205
KF105 P733
50V 22μF
5mm X 8MM x 3mm
Thanks,
Warren
Comment