Announcement

Collapse
No announcement yet.

ACER AL1713m no power

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: ACER AL1713m no power

    Fun with Dick and Jane !!!!!Adult movie.............lol

    Comment


      #22
      Re: ACER AL1713m no power

      Ok. I am now finally getting around to ordering the U850 device which is marked on the package as "SG6841S".

      I think this is manufactured by fairchild but not 100% sure. I went to this web site and fairchild no longer manufactures this product. But i am not sure what to replace it with.

      If you look on ebay you can find the "SG6841SZ" device but not "SG6841S".......what i am wondering is if the "SG6841SZ" device is an equivalent replacement. I thought i could get this info from the fairchild site but i am a little confused from its site because of the "not recommended for new designs" comment on the fairchild site.

      Could someone help me ?

      Comment


        #23
        Re: ACER AL1713m no power

        if you look on page 2 of the SG6841 datasheet they are compatible.. SG6841SZ is the lead-free version of SG6841.. I have just used it to replace my faulty SG6841S..

        Comment


          #24
          Re: ACER AL1713m no power

          thanks newbie1.

          so the SG6841SZ is a valid replacement. thanks.

          One question, i tried to download the pdf you mentioned in your post.....i had issues downloading it. do you have the actual pdf file?

          thanks again.

          Comment


            #25
            Re: ACER AL1713m no power

            Originally posted by Welchs101 View Post
            thanks newbie1.

            so the SG6841SZ is a valid replacement. thanks.

            One question, i tried to download the pdf you mentioned in your post.....i had issues downloading it. do you have the actual pdf file?

            thanks again.
            here you go.
            Attached Files

            Comment


              #26
              Re: ACER AL1713m no power

              thanks! I am going to try and place the order today or tomorrow.

              Comment


                #27
                Re: ACER AL1713m no power

                Part SG6841SZ finally came in. I ordered it off ebay from someone in HongKong ......took a while but i am in no rush.

                I removed the old part and put in the new SG6841SZ and BAM! Monitor came back to life.

                So you were right.......the SG6841SZ was the bad part.

                Question: Regarding the 10ohm resistor.
                I think i should replace this resistor......dont you guys?
                I have two resistors currently in my possesion that i bought years ago a radio shack for some reason or the other.
                Type1: 10-ohm Metal Oxide resistor 1 watt 5% tolerance
                Type2: 10-ohm resistor 1/2 watt 5% tolerance

                Which one of these should i use....or should i not even use one of these?

                Thanks again......

                Comment


                  #28
                  Re: ACER AL1713m no power

                  congrats on the job well done..
                  mine is still dead after replacing the IC..

                  As for the resistor, frankly i am not too sure.. maybe the experts here can advise you..

                  Comment


                    #29
                    Re: ACER AL1713m no power

                    Newbie, what are the symptoms of your monitor?

                    I also had to replace the following capacitors:
                    C867:1000UF/16v => replaced with 1000uF/25V
                    C862: 1000uf/25v => replaced with 1000uF/25V
                    C865: 470Uf/25v => replaced with 470uF/25V
                    C22 and C6: 220uF/25V => replaced with 220uF/35V

                    also the resistor R852 may need to be replaced.

                    Comment


                      #30
                      Re: ACER AL1713m no power

                      Well, we share the same symptom & same IC problem (initially) but mine is of different monitor. To cut the long story short, now my HP f1905 is 'dead' likely to be caused by logic card (suspected EEPROM corrupted). Its ok. I keep moving on.. Anyway, I learnt & experienced a great deal from the FANTASTIC guys here, even though the monitor was not revived..

                      Comment


                        #31
                        Re: ACER AL1713m no power

                        In post #27 i posted a question about a 10ohm resistor........can someone take a look at it and let me know what they think?

                        thanks. hope you all had a nice thanksgiving.

                        Comment


                          #32
                          Re: ACER AL1713m no power

                          Originally posted by Welchs101 View Post
                          In post #27 i posted a question about a 10ohm resistor........can someone take a look at it and let me know what they think?

                          thanks. hope you all had a nice thanksgiving.
                          R1 is supposed to be a 10 ohm, .25 watt resistor. In this application it shouldn't make any difference if it reads slightly high, but just to stop you from bugging us, use the 1/2 watt resistor.

                          PlainBill
                          For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

                          Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

                          Comment


                            #33
                            Re: ACER AL1713m no power

                            thanks!

                            Comment


                              #34
                              Re: ACER AL1713m no power

                              is there any equivalent for SG6841SZ..coz i can not find it in pakistan. thanks

                              Comment

                              Working...
                              X