Denon RCD-N7

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tom_x
    Member
    • Aug 2018
    • 28
    • Hungary
    #1

    Denon RCD-N7

    Hi

    I'm looking for firmware files for this unit
    Now can't download any firmware from Denon.
    This unit have problem with network card (maybe corrupted firmware)
    I must burn upgrade cd to re-flash firmware
    Anyone have this file ( EU region)
    Thx
    Tom
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • TheUser
      Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
      by TheUser
      Hello to everyone ,

      This is my first post here, and i would like to share with you a small story in case you can help me.

      Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

      All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

      I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
      02-10-2024, 02:07 PM
    • gurj1979
      Ubiquiti firmware help. US-8-150W POE
      by gurj1979
      Hi guys.

      I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
      Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

      So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
      Got New chip and writes good.

      THE PROBLEM...
      It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

      Does anyone have a Good Firmware I can have?...
      07-22-2024, 05:13 PM
    • sikocan
      NP930XED Samsung Galaxy Book2 Pro Laptop PD Firmware Loop
      by sikocan
      Hello,

      I hope this message finds you well. I wanted to share a recent experience I had with a laptop that had a Type-C Port issue, specifically related to a PD (Power Delivery) controller problem. After replacing the damaged PD controller chip with a new one I purchased from AliExpress, the laptop now charges properly and negotiates power as expected, allowing the device to power up. I've replaced this chip twice just in case.

      However, it seems that the laptop's BIOS is detecting an older version of the PD Firmware on the newly installed chip. As a result, it attempts...
      01-11-2024, 01:47 AM
    • ngml
      Repair of an LG split AC system indoor unit PCB
      by ngml
      I am trying to repair an LG split AC indoor unit, which does not start and gives a CH05 error code.
      This indicates an error in the communication between the outdoor and the indoor unit.
      The outdoor unit is fine, so the problem is the indoor PCB.
      The indoor unit is an LG PC09SQ NSJ (3SNM09JA2FA), and the PCB has the following type number: EAX35907219-1.2 (see photo1)
      I changed optocouplers ICO1X & ICO2X and the NPN transistor S9013 which drives optocoupler ICO2X (see photo2), but this did not remedy the fault.

      Does anybody have the schematics of this board,...
      2 Photos
      02-01-2025, 12:55 PM
    • skynetto
      MSI Z590 MS-7D07 rev 2.1 EC Firmware
      by skynetto
      Hello there.
      I have this mainboard (MSI Z590 Gaming edge - MS-7D07 rev 2.1) with these symptoms.
      1. SIO_3VA ON
      2. ATX_5VSB ON
      3. 3VDSW ON
      4. Mainboard stucked in Deep_S5 state

      Problem:
      RSMRST Incative. (Obviosly everything dead)


      Tried just for fun to update the BIOS with its Bios flashback function (Push button and USB stick with bios in it).
      Main Bios restored succesfully.
      When updating Bios all the voltages comes on except PCH which is not needed.

      EC Controller: NCT6687D-M
      External SIO Firmware...
      03-17-2023, 10:30 AM
    • Loading...
    • No more items.
    Working...