No sound on one channel using RCA input

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Kyleadonis
    Member
    • Oct 2020
    • 17
    • South Africa
    #1

    No sound on one channel using RCA input

    Hi I'm trying to figure out what's the issue with this amplifier, Its a 2.1 channel system Dixon system (not a fan of this brand).

    Issue:
    -While using RCA or line in inputs the subwoofer plays and one of the speakers.

    But if I connect via Bluetooth all speakers play fine.

    I replaced the TDA7379 IC because it was previously blown with no sound at all.

    Please if anyone can give some advice? and if you need more photos let me know?


    Thanks
    Attached Files
    Tags: None
    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4422
      • United Kingdom
      #2
      Re: No sound on one channel using RCA input

      if tones and vol work on bluetooth look at the switching ic.s for mode switching if it has them

        Comment

        • Kyleadonis
          Member
          • Oct 2020
          • 17
          • South Africa
          #3
          Re: No sound on one channel using RCA input

          I took everything apart and did some testing then I reflowed the area I did work on and the issue is resolved somehow

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Sushi1808
              Onkyo TX-NR609 Sound only on USB/Internet Radio/DLNA Input
              by Sushi1808
              Hi everyone!

              I turn to you in hope someone could point me in the right direction since I lack knowledge and experience in diagnosis of audio equipment. (My experience is in computer chip level repairs.)

              I bought an Onkyo TX-NR609 receiver which initially produced no sound on speakers/headphones, there was no delayed relay click, speaker matrix icon didn't show up, USB/NET stuck in "Now initializing", instead of DSP/1st NET firmware version there were ?????????...

              There was flux residue around the D830K013BZKB4 DSP chip (Q3001) on the HDMI...
              07-01-2023, 07:53 AM
            • ChaosLegionnaire
              what i went through dealing with my mobo with dead onboard sound!
              by ChaosLegionnaire
              so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

              i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
              09-13-2022, 09:02 AM
            • ugamazing
              820-02020 Super Weird Issue: Keyboard Input Character Map "Wrong"?
              by ugamazing
              So, I have a really bizarre issue that I'm struggling to identify the cause of. Working on an 820-02020 board with some bizarre keyboard/input-source character mapping. My suspicion is a possible damaged SPI ROM (U1970), perhaps, but I'm really not sure in this case:

              1. The issue is pretty weird, but when installing MacOS, I noticed my WiFi password did not work. I quickly realized the special characters (!@#$%^& etc) were not mapping correctly.

              2. I noticed the keyboard layout/input-source is defaulting to JAPANESE every single time I restore the board. I am not...
              04-10-2024, 08:06 AM
            • MegaZAC
              Onkyo TX-SR805 noise in one channel
              by MegaZAC
              Surprisingly enough, this receiver doesn't have the DSP chip issue. The HDMI board does not get hot, and sound over HDMI works fine.

              Regardless of the input, the right channel has noise that is clearly noticeable even on average volume level. The only cases when there's no noise is when VCR input is selected (some tracks on the board are damaged, maybe that's why), or if HDMI input is selected but nothing plugged into it. In all other cases, even when no input is connected I still have the noise.

              There's some logic behind it. As soon as I select an input I get only left...
              04-23-2025, 10:09 PM
            • LEECH666
              Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
              by LEECH666
              Good day ladies and gentleman!

              I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

              This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

              I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
              01-19-2024, 05:46 PM
            • Loading...
            • No more items.
            Working...