Need a Yamaha RX-A3050 dsp 1 spi memory dump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dobrykamil
    Senior Member
    • Jun 2013
    • 62
    • UK

    #1

    Need a Yamaha RX-A3050 dsp 1 spi memory dump

    Hi

    Does anyone have working .bin file for first DSP? IC912 is either EN25Q32B or W25Q32FVSSIG and dsp itself is D81YK113DZKB5.

    Thanks in advance.
  • dobrykamil
    Senior Member
    • Jun 2013
    • 62
    • UK

    #2
    Re: Need a Yamaha RX-A3050 dsp 1 spi memory dump

    Problem solved.

    Comment

    Related Topics

    Collapse

    • Habble7
      I need a BIOS dump for the Samsung S49CG934SU monitor
      by Habble7
      The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

      Suspected Cause:
      I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

      Troubleshooting Attempts:
      ...
      05-22-2025, 07:28 AM
    • Mephysis
      DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
      by Mephysis
      Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

      I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
      03-27-2025, 02:34 AM
    • nams2590
      Yamaha RX-V581 DSP dump files
      by nams2590
      Hello everyone,

      I'm currently trying to troubleshoot a Yamaha RX-V581 amplifier.
      The whole HW looks fine to me but I notice the DSP flash memories are empty.
      As a result their is no sound on HPs and speaker menu is not available.
      Does anyone has these DSP flash memory content?

      The related 2 memories are Winbond W25Q32.

      That would help a lot.
      Thanks in advance

      Best Regards
      04-15-2023, 04:36 AM
    • hyperwood
      [REQUEST] 2MB BIOS Dump for Lenovo NM-E471 Rev 2.0 (Winbond 25Q16JWSIQ Chip)
      by hyperwood
      Hi everyone,

      I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.

      The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.

      I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....

      āœ… What I need:
      • A working 2MB BIOS dump
      • Matching NM-E471 Rev. 2.0, e.g. JY575
      ...
      06-25-2025, 02:28 PM
    • Andreas_de
      Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
      by Andreas_de
      Hello!

      i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
      Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

      Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
      ...
      04-12-2025, 10:38 AM
    • Loading...
    • No more items.
    Working...