Denon Avr-2308ci HDMI Board (1U-3852)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lcdman
    TinkerTech
    • Nov 2010
    • 232
    • U.S.A.
    #1

    Denon Avr-2308ci HDMI Board (1U-3852)

    Hello All,

    I have the service manual for this Denon avr-2308ci receiver. But I'm not seeing the value for this smd transistor. Even in the service manual. Its burned beyond recognition. Its right below CC104. I need help replacing it but first I need to ID it first. Any help would be greatly appreciate it.

    Thanks As Always,
    Lcdman
    Attached Files
    Tags: None
    • lcdman
      TinkerTech
      • Nov 2010
      • 232
      • U.S.A.
      #2
      Re: Denon Avr-2308ci HDMI Board (1U-3852)

      Hello All,

      I have the service manual for this Denon avr-2308ci receiver. But I'm not seeing the value for this smd transistor. Even in the service manual. Its burned beyond recognition. Its right below CC104. I need help replacing it but first I need to ID it. Any help would be greatly appreciated.

      Thanks As Always
      Lcdman

      (PS) I didn't know how to edit my last post so thats why its up again. Also sorry about my pictures. Those components are so damn small!!!!
      Attached Files

        Comment

        • lcdman
          TinkerTech
          • Nov 2010
          • 232
          • U.S.A.
          #3
          Re: Denon Avr-2308ci HDMI Board (1U-3852)

          Hey All,

          Nobody has any info to help me? Somebody here must have seen or worked on one like it. There was another posting about this exact board.

          https://www.badcaps.net/forum/showth...denon+avr+2308

          I just need the value of the smd transistor. Its the one right below CC104. I don't want to buy another board if I can help it. Used one starts @ $100.

          Thanks For Reading My Post
          Lcdman
          Attached Files

            Comment

            • R_J
              Badcaps Legend
              • Jun 2012
              • 9515
              • Canada
              #4
              Re: Denon Avr-2308ci HDMI Board (1U-3852)

              It is TR103, KRA102S-RTK/P

                Comment

                • lcdman
                  TinkerTech
                  • Nov 2010
                  • 232
                  • U.S.A.
                  #5
                  Re: Denon Avr-2308ci HDMI Board (1U-3852)

                  Hello Again,

                  First off thank you R_J. Second I found some on Ebay (Domestically) which normally is frowned upon in general on the forum from what I gather. But all the description doesn't 100% match. Does that matter?

                  Take Care,
                  Lcdman

                  https://www.ebay.com/itm/17411068148...torefresh=true

                    Comment

                    • R_J
                      Badcaps Legend
                      • Jun 2012
                      • 9515
                      • Canada
                      #6
                      Re: Denon Avr-2308ci HDMI Board (1U-3852)

                      $28.50 shipping? find somewhere else. you can use a RN2402, DTA114EK, UN2111, FN1A4M

                      Looks like digikey has some DDTA114ECA-7-F

                      This should get you close, https://www.digikey.com/en/products/...FS2qDT2c4mJiQA
                      Last edited by R_J; 02-05-2021, 09:03 PM.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • m1ch43lzm
                          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                          by m1ch43lzm
                          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                          05-12-2025, 08:37 PM
                        • H34TO
                          ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
                          by H34TO
                          Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
                          06-17-2025, 07:17 AM
                        • benspawn02
                          Anthem MRX500 - no sound. R2A15218FP issue??
                          by benspawn02
                          Anthem MRX500 - no sound

                          Dear Electronics Experts:

                          I have the following problem I am trying to troubleshoot. Unfortunately, I have contacted Anthem themselves and even a local distributer but I am not having much luck. Also, I have scoured the internet and unable to obtain a service manual. The Anthem service rep has also replied that he is unable to provide me with any service documentation. I have performed numerous searches on the internet and cross-referenced a few other AV receiver makers (Denon, Marantz, Onkyo) and found certain similarities to block diagram...
                          08-12-2023, 04:46 AM
                        • Tynan Dill
                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                          by Tynan Dill
                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                          Upon bringing it home and plugging it up, it showed a standby light.

                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                          Assuming...
                          ORIGINAL POWER SUPPLY BOARD
                          7 Photos
                          11-22-2024, 01:46 PM
                        • SevenOFF
                          Denon AVR-X4000 – Fast red blinking after 2nd relay
                          by SevenOFF
                          Hi everyone,

                          I’m working on a Denon AVR-X4000 that goes into protection mode (fast red blinking LED) shortly after the second relay click.

                          According to the service manual, a fast red blinking LED indicates a DC detection (DC_DET) or ASO (abnormal current) fault, meaning the unit is detecting a potentially dangerous condition on the power amp or power supply side.

                          Here’s what I’ve done so far:
                          • Fully opened and cleaned the unit (a lot of dust inside)
                          • Removed and visually inspected the AMP board → nothing visibly damaged or burned
                          • Testing is done with
                          ...
                          06-18-2025, 09:54 PM
                        • Loading...
                        • No more items.
                        Working...