Philips HTS7140 Soundbar

Collapse
X
 
  • Time
  • Show
Clear All
new posts

Related Topics

Collapse

  • zyklop
    Philips Soundbar TAB8507B/10 stopped working
    by zyklop
    Helllo everybody....

    i have this soundbar to repair for a friend. Its finally 2 years and seldom used but already broken.
    Inbetween it has one time started, but no more yet.

    Is anybody who has schetatic or service maual ?!

    Power supply seems to be ok and has stable 24V DC. No control line or somthing else...........
    No thermal hotspots or something else controlled with thermal imaging cam.
    No reaction on remote control (function ok, can see it while glow into mobile-camera)
    No shorts to detect.
    ALso tested all reset procederes...
    07-07-2025, 05:08 AM
  • StasNep
    Philips HTL6140B/12 SoundBar no power
    by StasNep
    Hello

    I have got a defective Philips HTL6140B/12 SoundBar, no power from button or remote.
    The power supply is external and working correctly, even tried another one.
    Checked caps with esr meter and all seems ok.
    Checked various resistors and smd capacitors and they seems ok.

    Please help to diagnose this SoundBar.

    Thanks ...
    02-20-2022, 10:37 AM
  • ngml
    Repair of an LG split AC system indoor unit PCB
    by ngml
    I am trying to repair an LG split AC indoor unit, which does not start and gives a CH05 error code.
    This indicates an error in the communication between the outdoor and the indoor unit.
    The outdoor unit is fine, so the problem is the indoor PCB.
    The indoor unit is an LG PC09SQ NSJ (3SNM09JA2FA), and the PCB has the following type number: EAX35907219-1.2 (see photo1)
    I changed optocouplers ICO1X & ICO2X and the NPN transistor S9013 which drives optocoupler ICO2X (see photo2), but this did not remedy the fault.

    Does anybody have the schematics of this board,...
    02-01-2025, 12:55 PM
  • G33RT
    Philips 8200 series 65PUS8204/12 stuck at Philips Logo
    by G33RT
    Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

    It does power up when pressing the power button.

    I already try the power button while plugin the plug with no result.
    Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

    Could this be an PSU or eMMC issue ?
    07-19-2025, 03:43 AM
  • nobbnobb1
    Bose Companion 5 - Unit Powers On then Cuts Off Shortly After
    by nobbnobb1
    Hi guys,

    Trying to salvage a Bose Companion 5 computer speaker system that powers off shortly after powering on. It's got a primary USB input (built in DAC) and an aux 3.5mm input. The USB appears to be the primarily source that tells the unit to power on (control pod LED goes green) as the unit has no power switch.

    When I first connect power to the unit, plug in the USB, it will play audio nicely for a minute before it drops out and the unit appears to go into standby (control pod LED goes red). It stays in standby and I cannot seem to power it back on without physically...
    02-03-2022, 11:14 AM
  • Loading...
  • No more items.
Working...