Logitech Z5500 No Sound (Bad control pod help)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dannyx
    CertifiedAxhole
    • Aug 2016
    • 3912
    • Romania

    #1

    Logitech Z5500 No Sound (Bad control pod help)

    Good day folks. A former colleague of mine asked me to have a look at his prized Z5500 system which he's very fond of. He said it suddenly stopped working. He brought the sub and the console to our old shop where we use to hang out and the issue seems to be the console/pod. It turns on, the display works fine, the volume adjusts up and down, everything looks perfect but there's no sound at all on any of the channels, including the subwoofer. There IS sound coming out of the headphone jack though, so sound is making its way into the pod, but not into the sub where the amps are. The easiest way to confirm this was with a second pod from a friend and this one works. It was only a test setup (which I didn't even see, since he did it with another guy), but there WAS sound, so the problem is in the first guy's pod....

    Surprisingly few resources on this system, despite being rather popular

    Has anyone fixed these control pods before ? I don't have a scope sadly, so I can't quite probe "audio" stuff. I had a very brief look through the vent holes on the back and it's all SMDs in there.....looks very complicated, but perhaps the issue is rather simple....Where would I even start ? Thanks for any suggestions.
    Wattevah...
  • seanc
    Badcaps Legend
    • Nov 2008
    • 1319

    #2
    Re: Logitech Z5500 No Sound (Bad control pod help)

    Th3_uN1Qu3 knows some stuff about these. There was a great 'hacking' and mod community as well.

    I repaired one set, replacing all the caps in the sub and finding a used control pod, otherwise it was very temperamental.

    I have another to do, but my friend still has it, it turns itself off. I suspect the sub, but perhaps control pod.

    I think I recall one of the main chips in the control pod being a cirrus chip which can go bad, it should be referenced online.

    Comment

    • Dannyx
      CertifiedAxhole
      • Aug 2016
      • 3912
      • Romania

      #3
      Re: Logitech Z5500 No Sound (Bad control pod help)

      Thanks for the reply, but I managed to fix it after all. The problem: orange wire inside the control pod had broken off the solder pad....yeah.... Must be for MUTE/Stand-by control.
      Wattevah...

      Comment

      Related Topics

      Collapse

      • ChaosLegionnaire
        what i went through dealing with my mobo with dead onboard sound!
        by ChaosLegionnaire
        so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

        i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
        09-13-2022, 09:02 AM
      • Exotics
        Logitech Z5500 problem need help fixing
        by Exotics
        Here's a video I uploaded to show the problem.
        https://youtu.be/MbaZQ7aYMMY?feature=shared

        Quality isn't 1080p yet because I just uploaded it. YouTube takes a while to process videos to maximum quality.

        I have a multimeter and basically no electrical fixing knowledge.

        I came across a post on here describing the same issue if it helps y'all help me. -> https://www.badcaps.net/forum/troubl...500-done-today

        please help me diagnose and...
        10-04-2024, 06:17 AM
      • LEECH666
        Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
        by LEECH666
        Good day ladies and gentleman!

        I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

        This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

        I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
        01-19-2024, 05:46 PM
      • Dannyx
        Logitech Z5500 power, but no sound
        by Dannyx
        Good day folks. This is going to be a long story so please bare with me.

        TLDR: One of the infamous Z5500 sets powers on fine but has no sound AT ALL, not even on the headphone jack. Need a bit of help understanding the schematic and principle of operation of the mute/stby circuit. Attached "original" and edited schematic. Control pod might be bad.

        Long version: replaced a blown TDA7294 in the sub and now the set powers on but has no sound at all. The reason I believe the pod may be bad is because I don't get sound on the headphone jack either ! There's no...
        09-27-2021, 09:25 AM
      • Christos Tsiligiannis
        Marian Trace Alpha sound card repair help
        by Christos Tsiligiannis
        Hello to the forum.

        My name is Christos, I am new to the forum here and i am posting from Greece.

        So i have this old German sound card from Marian, called Trace Alpha. To be exact i have 2 of them and i use them professionally for my small FM radio station here. The first one works like a charm, but the second one does not work at all.

        To be more specific in the same exact pc with windows 7 (i even tried 32bit) the one works while the other doesn't.

        So i tried asking for a schematic from the company and they would not give me one. Instead they...
        11-18-2024, 05:26 AM
      • Loading...
      • No more items.
      Working...