Good day folks. A former colleague of mine asked me to have a look at his prized Z5500 system which he's very fond of. He said it suddenly stopped working. He brought the sub and the console to our old shop where we use to hang out and the issue seems to be the console/pod. It turns on, the display works fine, the volume adjusts up and down, everything looks perfect but there's no sound at all on any of the channels, including the subwoofer. There IS sound coming out of the headphone jack though, so sound is making its way into the pod, but not into the sub where the amps are. The easiest way to confirm this was with a second pod from a friend and this one works. It was only a test setup (which I didn't even see, since he did it with another guy), but there WAS sound, so the problem is in the first guy's pod....
Surprisingly few resources on this system, despite being rather popular
Has anyone fixed these control pods before ? I don't have a scope sadly, so I can't quite probe "audio" stuff. I had a very brief look through the vent holes on the back and it's all SMDs in there.....looks very complicated, but perhaps the issue is rather simple....Where would I even start ? Thanks for any suggestions.
Surprisingly few resources on this system, despite being rather popular

Has anyone fixed these control pods before ? I don't have a scope sadly, so I can't quite probe "audio" stuff. I had a very brief look through the vent holes on the back and it's all SMDs in there.....looks very complicated, but perhaps the issue is rather simple....Where would I even start ? Thanks for any suggestions.
Comment