Hi,
I hope I am in the correct forum as I am new to BADCAPS.NET. I have an Infinity PS-10 Subwoofer and I am trying to figure out how the separate the amp section from the plastic box it sits in. I removed all the screws around the plate and was able to pull out the Amp box. It is enclosed in a black plastic box and I am not sure if I need to remove any other screws for example, the four around the left and right + and - inputs, or the screw near the power cord, etc. I have a copy of the repair manual, but the blow up does not show the amp box assembly other than then whole box. I want to go in and check the capacitors, resistors, etc. I hope some can help me out.
Thanks in advance,
Joel
I hope I am in the correct forum as I am new to BADCAPS.NET. I have an Infinity PS-10 Subwoofer and I am trying to figure out how the separate the amp section from the plastic box it sits in. I removed all the screws around the plate and was able to pull out the Amp box. It is enclosed in a black plastic box and I am not sure if I need to remove any other screws for example, the four around the left and right + and - inputs, or the screw near the power cord, etc. I have a copy of the repair manual, but the blow up does not show the amp box assembly other than then whole box. I want to go in and check the capacitors, resistors, etc. I hope some can help me out.
Thanks in advance,
Joel
Comment