Rockola 490-2

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ljintexas
    LJinTexas
    • Jan 2015
    • 669
    • USA
    #1

    Rockola 490-2

    Does anyone have experience or resources such as a service manual for this Jukebox? I can communicate with the controller, but it appears whatever type of drive system powers the mechanism has a failure. The motor runs when it should. Just does not drive the mechanism.

    TIA

    LJ
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • juergenb
      Nescafe Aeroccino, still fails with new Motor (red flashes only once)
      by juergenb
      Hi,

      i am asking for some Help.
      I have one of these Nescafe Aeroccino (Milk Frother) things with a bad motor.
      The Motor didn´t start anymore and internet is full of users just swapping the motor for a Mabuchi RF-500TB-12560.
      So i got a few of these from Banggood.

      I swapped the motor and now i have a new fault condition.

      In a working Frother you would press the start button, it will light red and work for a few minutes.
      If you press longer it will light blue and just mixup the milk.

      With the new Motor it just starts...
      03-23-2021, 11:24 AM
    • sbt123
      charnwood w821 mini wood lathe motor problem
      by sbt123
      hi there,im having a look at repairing a wood lathe for my dad,(charnwood w821)the problem is when turning up the variable speed control,the motor starts to stop and start by itself,if i continue to turn up the speed it will trip the mcb in the consumer unit,there is also a slight smell of burning from the speed controll box.,Another strange symptom is the lathe can be unplugged from the mains after switching it off and the motor will spin a couple of times by itself,so far ive put a new speed controll potentiometer on and new motor brushes,ive also tested the motor windings and everything looks...
      10-27-2024, 03:43 AM
    • Per Hansson
      Motor run capacitor physical size vs voltage rating & measurements?
      by Per Hansson
      (TL;DR skip the first paragraph)
      I encountered my first dead motor run capacitor at a customer this week.
      For some fields I guess it is a very common occurrence but the usual way for industrial machines here is to use 3-phase motors.
      (Unless a servo motor makes more sense that is).
      But for some reason this 3-phase machine uses a 1-phase motor for its liquid coolant pump.
      The pump would run but sometimes trip the 10A breaker.
      I monitored it starting and stopping for over an hour until it finally stopped in a specific spot between its windings:
      Then it could...
      09-20-2020, 06:32 AM
    • mikey5791
      Help identify this motor
      by mikey5791
      Hi all forum members,
      Found this unknown motor discarded in a junk yard and took home for learning experience. By the look of it, I suspect it is taken out from a type of air blower probably running on ac power. I used digital multimeter on ohm/resistance scale and it doesn't read anything on those 2 black wires. So, this motor is not shorted and should be good to run.

      Correct me if i am wrong on the initial test.
      Can anyone kindly advice on how to test run this motor based on visible external two black wires. Fyi, i don't see any marking on the motor body nor smell anything...
      11-24-2023, 07:54 PM
    • cjard
      A motor controller is a power supply, right?
      by cjard
      Hoping someone here will be able to provide a few pointers with this. I've got a motor controller board for a device that moves a caravan. A DC motor on each wheel is supplied with 12v DC or -12V DC depending on whether the remote control is pushed in "forward" or "backward" mode. The control is arranged by having 2 relays per motor that, at rest, are all connected to the negative.. If the motor is to go forwards, then relay 1 activates meaning the motor sees "positive negative" on its terminals 1 and 2. If the motor is to go backwards then relay 2 activates meaning...
      10-14-2020, 01:24 PM
    • Loading...
    • No more items.
    Working...