Sony CMT-BX5 (HCD-CBX5) repair, No disc, bad quality spindle motor JQ24-40H400

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Chungalin
    Badcaps Veteran
    • Jul 2014
    • 422
    • Spain
    #1

    Sony CMT-BX5 (HCD-CBX5) repair, No disc, bad quality spindle motor JQ24-40H400

    "No disc" message and typical pickup squeal of "want the disc to start spinning but it doesn't spin!!".

    I find the crappy JQ brand motor sadly common in many Sony equipment from mid 2000. They're present in both audio CD mechanisms (KSM213xxx) and DVD (KHM313AAA). They can be exercised with 6V and it usually relive, but with high chances of return. Not worth it.

    I've replaced it with a scrapped ol' good Mabuchi RF-310T-11400, adjusting disc support height to exactly 19.4mm (from support top surface to mechanism metal frame), using a caliper.
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • CyberPhoenix
      Issue with picture quality of Sony bravia TV
      by CyberPhoenix
      Hello, Last week I bought the 50" Sony X80j tv everything was working fine, untill I plugged the tv in a ups power supply 650va the tv remote control became unresponsive and the TV became laggy after a while the picture quality isn't the same as before the tv seems less brighter and the picture is somehow blurry, people's faces don't look as natural as before, there is a mini orange-pink tint to the edge of people's faces especially in NETFLIX Dolby Vision like in One Piece ep1 Alvida skin tone, my intention was to protect the tv but something went wrong I checked the ups with a multimeter,...
      Badcaps Electronics Repair Forum & Schematic Search - Badcaps
      https://www.badcaps.net
      01-22-2024, 02:08 AM
    • Junior††
      PS5 Disc Not Supported/ Disc Not Recognized Board Num: EDM-020
      by Junior††


      Good Afternoon fellas,

      Issue:
      Disc is showing as not supported when a disc is put in.

      Here's what I've done, you can skip this if you just wanna know the question:
      - replaced with a disc drive from a donor ps5 (honestly questionable if this is known to work)
      - reflowed the disc drive connector
      -reflowed the chip in question (shown on image)
      - I will say this console was very dusty so it's conceivable that it got so hot that it made the chip joints cold and potentially other things on the board

      Question:
      I...
      02-19-2025, 12:48 PM
    • Carlos#2003%
      Schematic de una Sony VAIO PCG-41217u, Sony VPCSB45FL (MBX-237), 1p-0117j01-a012 mbx-237.
      by Carlos#2003%
      Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla....
      02-15-2024, 07:52 PM
    • m4a2t0t
      Pioneer Laseractive CLD-A100
      by m4a2t0t
      The disc spindle motor will not spin on this unit. The motor has 2.5v on both sides and does not change.

      I have a second unit that works 100% that needed a recap. I tried the PSU before and after the recap. No change. I swapped the video board that has all of the ICs on it and it still wont spin. I injected 2.5v into CN2 (the motor connector) and the motor spun.

      The pickup assembly moves back and forth. The laser appears to light up, although it doesn't look like any newer laser diode with a well defined dot in the center. I can see red light refracting off the lens...
      09-11-2023, 09:01 PM
    • juergenb
      Nescafe Aeroccino, still fails with new Motor (red flashes only once)
      by juergenb
      Hi,

      i am asking for some Help.
      I have one of these Nescafe Aeroccino (Milk Frother) things with a bad motor.
      The Motor didn´t start anymore and internet is full of users just swapping the motor for a Mabuchi RF-500TB-12560.
      So i got a few of these from Banggood.

      I swapped the motor and now i have a new fault condition.

      In a working Frother you would press the start button, it will light red and work for a few minutes.
      If you press longer it will light blue and just mixup the milk.

      With the new Motor it just starts...
      03-23-2021, 11:24 AM
    • Loading...
    • No more items.
    Working...