Onkyo tx-sr606 fluorescent display not working

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • redwire
    Badcaps Legend
    • Dec 2010
    • 3907
    • Canada
    #21
    Re: Onkyo tx-sr606 fluorescent display not working

    -VP is a 37VDC regulator Q9001 maybe check C9005, C9001 for heat damage. It makes +5VDIS and -VP at -31.5VDC
    Filament AC FLAC1, FLAC2 lines go through many connectors and just jumper in and out of a board. What a mess. They go to a transformer winding S4.

    Only 3 models get the cooling fans

    Onkyo TX-SR606 Service Manual here:

      Comment

      • assenheimer
        New Member
        • Aug 2023
        • 4
        • Brazil
        #22
        Re: Onkyo tx-sr606 fluorescent display not working

        Originally posted by lotas
        Replace the display power capacitors (anode voltage and filament voltage).
        So there is a hope!
        Did you know where I can find them on the board?

        Sorry for my poor English.

          Comment

          • assenheimer
            New Member
            • Aug 2023
            • 4
            • Brazil
            #23
            Re: Onkyo tx-sr606 fluorescent display not working

            So I replace the 470uf capacitor and success!!
            Thanks for the help!
            I'm so happy!

              Comment

              • redwire
                Badcaps Legend
                • Dec 2010
                • 3907
                • Canada
                #24
                Re: Onkyo tx-sr606 fluorescent display not working

                I'm guessing that is C9001 470uF 63V on the Video PC Board, schematic #4 SD-4.

                  Comment

                  • Blue95
                    New Member
                    • Oct 2023
                    • 1
                    • Australia
                    #25
                    Re: Onkyo tx-sr606 fluorescent display not working

                    Had success today with one of these, thankyou

                      Comment

                      Previous 1 2 template Next

                      Related Topics

                      Collapse
                      • ai.need.help
                        Onkyo TX-8050 AV-Receiver no sound
                        by ai.need.help
                        Hello,

                        I have a problem with my Onkyo TX-8050 Receiver. I got it from aftermarket and it was just delivered today.

                        It doesn't play music. There is no real output from:
                        pre-out
                        amp-out A and B
                        phones out

                        The only real sound I hear is a humming from the speakers when I play a song from usb or select a analog source. And when stopping and starting songs from usb or switching sources, I hear a crack from the speakers.

                        I tested with analog-input, usb and radio.

                        I know that there is a common problem with...
                        12-20-2022, 05:54 PM
                      • wolf1976
                        wireless receiver for 6 speeds fan control with remote control
                        by wolf1976
                        hi i have a receiver that is destroyed from the overvoltage i guess
                        my question is has three wires u v w for driving a motor fan i found an other receiver wireless from aliexpresss with the same propertiew but for dc motor
                        the motor fan has not label
                        i have an other receiver operational
                        In your opinion can i measure the voltage at the output ?
                        what do you suggest me with a simple instrument multimeter or using someone instrument more specific ?
                        thanks in advance...
                        07-23-2025, 03:12 PM
                      • budwich
                        onkyo 919 Receiver... hum problem but...
                        by budwich
                        I have an onyko 919. It has a hum problem at cold start which eventually dies / goes quiet. I have been "chasing" it for a while. Tightening ground screws and checking a few places. Basically, the problem is in the "back half" of the unit.... that is, if I take the sound out of the "pre-out" and feed it to a stand alone amp, it is good. If I feed in a signal at the external decoder input and play thru the back end of the onkyo, it has the hum.

                        Anyway, along the way (the chase), a number of components (resistors, capacitors, etc) on the main board...
                        01-13-2021, 03:31 PM
                      • CdDvdFlash
                        DSE GE6878 possible TV receiver dying remote not working well
                        by CdDvdFlash
                        For this Dick Smith TV GE6878 (Thompson) I replaced the broken remote with a universal it kinda works though if its more than a few meters away sometimes the buttons register and sometimes they wont so I bought another remote from another brand and it has the same problem, I've had an old TV in the past that the sensor died completely and I replaced it to fix it could this be a similar problem? I tried looking for a service manual, spare parts for a receiver and a parts list but I couldnt find any info. can someone please help me to find the info online for a service manual or where I can buy...
                        07-03-2024, 03:55 AM
                      • Cornito
                        Denon AVR-2700H audio stops while receiver still works
                        by Cornito
                        Hello team,

                        I've got a new issue with a Denon Avr-2700H.
                        After several minutes working, receiver stops playing sound with a poc eared in the speakers.
                        Receiver still work and display video with error message on display.
                        Seems to me that is the main output relay.

                        I'm looking for the service manual that I can't find for the moment.

                        Does somebody have it?

                        Regards...
                        Today, 06:10 AM
                      • Loading...
                      • No more items.
                      Working...