H/K595 pinouts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pentium
    Badcaps Legend
    • Mar 2006
    • 2778
    • Canada

    #1

    H/K595 pinouts

    A while back I spent $1 and got myself the sub/amp box for a Harmon Kardon H/K595 pc speaker set.
    To be honest I was attracted by the digital jack but it was when I got it home that I realized was missing the two main speakers which also housed the adjustment controls.
    This gave me three options. Make speakers, find spares or toss it and keep looking. I really want to keep this system but all that's holding me back now is that bloody control. does anyone have access to the pinouts for the system?
    Find Nedry!


    Check the Vending machines!!

    <----Computer says I need more beer.
  • pentium
    Badcaps Legend
    • Mar 2006
    • 2778
    • Canada

    #2
    Re: H/K595 pinouts

    Oh heck.
    I think I'll stick with my trusty packard bell monitor speakers.
    Find Nedry!


    Check the Vending machines!!

    <----Computer says I need more beer.

    Comment

    • Solidwire
      New Member
      • Apr 2017
      • 2
      • United States

      #3
      Re: H/K595 pinouts

      It's been 11 years since Pentium's post and here I sit with one of this subs in the same bent over position. I BELIEVE If I could only figure out how to jump out the low voltage switch which comes from the satellite speakers and tells the sub to turn itself on. This would be resolved. Any clues anyone.

      Comment

      • madan1
        Badcaps Veteran
        • Nov 2016
        • 682
        • Bulgaria

        #4
        Re: H/K595 pinouts

        upload service manual or at least several detailed pics of the board(s)

        Comment

        Related Topics

        Collapse

        • AllElectronicsRepairs
          Pinouts for CG2313QIR-00, CG3215QIR-00 and 88E6020-NNC2
          by AllElectronicsRepairs
          Would somebody PLEASE have pinout for any of these 3 chips: Sigma Designs (Coppergate) CG2313QIR-00 (QFN-64) and CG3215QIR-00 (QFN-128), as well as Marvell 88E6020-NNC2 (QFN-64)? I tried everywhere I could think of on the internet without success. You can buy them alright, although not at any of the major distributors - mostly eBay, but I can't find any datasheets or at least pinouts. How one is supposed to design anything without such a basic information like chip pinout? Not even mentioning any more detailed properties... These integrated circuits are used in EOP (Ethernet Over Power) and POE...
          12-09-2024, 11:12 PM
        • maleksa
          Roland Fantom XR. Help with LCD screen pinouts
          by maleksa
          The LCD screen on my Roland Fantom XR rack synthesizer has gone blank. I managed to get the schematics for the connection to the LCD.

          The standard LCD has D0 to D7 pinouts (in addition to the normal VDD, VSS, CS, RES, RW, EN etc).

          Can someone help me to identify what V1 to VR is for? Also how does VR work?

          Any help is truly much appreciated....
          06-03-2024, 08:27 PM
        • Bowline
          Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
          by Bowline
          My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

          Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

          My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
          The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
          I have tried multiple different Dell power adapters. My Dell...
          06-11-2025, 10:13 AM
        • stj
          harmon kardon HK695 / champagne schematic needed
          by stj
          ...
          07-07-2024, 09:59 AM
        • r2digital
          Harmon Kardon AVR340 no sound on 4 channels
          by r2digital
          Hello, i had this amp sitting in the closet knowing that none of the channels were working. After taking it all apart i found 4 bulging main filter caps so i went ahead and replaced those with low ESR kmet caps. However after doing this it only restored sound to Surround L, Surround R, and Center channel. The main speaker fuse on the transformer F905/F906 keeps blowing so i decided to remove all of the transistor's on those 4 channels and measure them. All transistors appear to be in good working order(turned receiver on with none of them installed and fuse still blows). Checked dual emitter resistors...
          03-09-2024, 01:33 PM
        • Loading...
        • No more items.
        Working...