VSP-M1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kasfamily
    Badcaps Veteran
    • Aug 2014
    • 773
    • Russia

    #21
    Check the serviceability D03

    Comment

    • Carm99
      Senior Member
      • Jun 2014
      • 69
      • England

      #22
      I just checked again. The adaptor is DC.! 💀

      Comment

      • kasfamily
        Badcaps Veteran
        • Aug 2014
        • 773
        • Russia

        #23
        So disassemble the adapter and remove the diodes from it and it will turn into AC
        And the filter capacitor must also be removed
        Last edited by kasfamily; 03-15-2024, 09:28 AM.

        Comment

        • Carm99
          Senior Member
          • Jun 2014
          • 69
          • England

          #24
          I bought one. 10VAC 1500mA.

          Comment

          • kasfamily
            Badcaps Veteran
            • Aug 2014
            • 773
            • Russia

            #25
            Are waiting for the results…

            Comment

            • Carm99
              Senior Member
              • Jun 2014
              • 69
              • England

              #26
              The Adaptor should be here next week.
              I'll be surprised if it don't work.
              Cheers for the help so far.

              Comment

              • Carm99
                Senior Member
                • Jun 2014
                • 69
                • England

                #27
                Im waiting on a plug for the adaptor ,as the one on the end ,don't fit ,as the pin on the device is too big.
                One thing I noticed when buying one ,is there are a lot more DC adaptors than AC ones around.
                Did you work out why the front panel works with the DC Adaptor.?
                Cheers

                Comment

                • kasfamily
                  Badcaps Veteran
                  • Aug 2014
                  • 773
                  • Russia

                  #28
                  Hi, the front panel is working by DC because it doesn't need negative voltage. Minus 8 volts is only needed to power the chips operational amplifier .

                  Comment

                  • Carm99
                    Senior Member
                    • Jun 2014
                    • 69
                    • England

                    #29
                    Ok man. Thats what I was thinking.
                    The Unit is all back together now.
                    I'm still waiting on the plug.

                    Comment

                    • Carm99
                      Senior Member
                      • Jun 2014
                      • 69
                      • England

                      #30
                      I got the Plug for the adaptor at last. A Nice Silver one.
                      Soldered it all up with Heatshtink included to make it ice and neat.

                      Click image for larger version

Name:	XOCS0080.jpg
Views:	91
Size:	1.95 MB
ID:	3248572
                      I plugged it in and hooked it up like a mixer and it works.

                      Im getting the audio through it.
                      I'll try a mic later on and mess with the effects a bit.
                      Ive had it a while and didn't know the adaptor was the wrong one.
                      Sad really.
                      Great to see it working like it should .😊

                      Comment

                      • kasfamily
                        Badcaps Veteran
                        • Aug 2014
                        • 773
                        • Russia

                        #31
                        Well, great, congratulations!

                        Comment

                        • Carm99
                          Senior Member
                          • Jun 2014
                          • 69
                          • England

                          #32
                          Thanks for the Help Man.😎

                          Comment

                          Related Topics

                          Collapse

                          • ChaosLegionnaire
                            what i went through dealing with my mobo with dead onboard sound!
                            by ChaosLegionnaire
                            so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

                            i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
                            09-13-2022, 09:02 AM
                          • LEECH666
                            Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
                            by LEECH666
                            Good day ladies and gentleman!

                            I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

                            This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

                            I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
                            01-19-2024, 05:46 PM
                          • Christos Tsiligiannis
                            Marian Trace Alpha sound card repair help
                            by Christos Tsiligiannis
                            Hello to the forum.

                            My name is Christos, I am new to the forum here and i am posting from Greece.

                            So i have this old German sound card from Marian, called Trace Alpha. To be exact i have 2 of them and i use them professionally for my small FM radio station here. The first one works like a charm, but the second one does not work at all.

                            To be more specific in the same exact pc with windows 7 (i even tried 32bit) the one works while the other doesn't.

                            So i tried asking for a schematic from the company and they would not give me one. Instead they...
                            11-18-2024, 05:26 AM
                          • Document Archive
                            HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar ProDesk 600 i5-9500T Specification for Upgrade or Repair
                            by Document Archive
                            This specification for the HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar boardview and ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                            09-12-2024, 02:30 PM
                          • Document Archive
                            HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar ProDesk 600 i7-9700 Specification for Upgrade or Repair
                            by Document Archive
                            This specification for the HP ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar boardview and ProDesk 600 G5 + LG SJ2 Bluetooth Sound Bar schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
                            09-12-2024, 02:30 PM
                          • Loading...
                          • No more items.
                          Working...