VSP-M1

[kasfamily]

Check the serviceability D03

[Carm99]

I just checked again. The adaptor is DC.! 💀

[kasfamily]

So disassemble the adapter and remove the diodes from it and it will turn into AC
And the filter capacitor must also be removed

[Carm99]

I bought one. 10VAC 1500mA.

[kasfamily]

Are waiting for the results…

[Carm99]

The Adaptor should be here next week.
I'll be surprised if it don't work.
Cheers for the help so far.

[Carm99]

Im waiting on a plug for the adaptor ,as the one on the end ,don't fit ,as the pin on the device is too big.
One thing I noticed when buying one ,is there are a lot more DC adaptors than AC ones around.
Did you work out why the front panel works with the DC Adaptor.?
Cheers

[kasfamily]

Hi, the front panel is working by DC because it doesn't need negative voltage. Minus 8 volts is only needed to power the chips operational amplifier .

[Carm99]

Ok man. Thats what I was thinking.
The Unit is all back together now.
I'm still waiting on the plug.

[Carm99]

I got the Plug for the adaptor at last. A Nice Silver one.
Soldered it all up with Heatshtink included to make it ice and neat.


I plugged it in and hooked it up like a mixer and it works.

Im getting the audio through it.
I'll try a mic later on and mess with the effects a bit.
Ive had it a while and didn't know the adaptor was the wrong one.
Sad really.
Great to see it working like it should .😊

[kasfamily]

Well, great, congratulations!

[Carm99]

Thanks for the Help Man.😎