Harman HA-7.1hd(stuck on the same volume)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Amraks
    Badcaps Veteran
    • Nov 2011
    • 725
    • Australia

    #21
    Re: Harman HA-7.1hd(stuck on the same volume)

    Photos as promised.



















    Would be nice to fix it for the guy, His looking after me with timber and stuff to build my budgie breeding cabinets shelfing.
    Attached Files

    Comment

    • gilly1984
      Badcaps Veteran
      • Jun 2012
      • 751
      • UK

      #22
      Re: Harman HA-7.1hd(stuck on the same volume)

      Yep. Auna /Hyundai rebadge.

      check for dry joints around the volume control. or might be a dead ic that controls the volume for the centre and rears.
      Do NOT touch heatsinks when testing for voltages as they may be LIVE!

      Comment

      • Amraks
        Badcaps Veteran
        • Nov 2011
        • 725
        • Australia

        #23
        Re: Harman HA-7.1hd(stuck on the same volume)

        Them little knobs turn down the volume that control the center and rear. but the big main knob will only turn down the front.

        I believe the back speakers and center speakers aren't even working at their max volume.

        Comment

        • gilly1984
          Badcaps Veteran
          • Jun 2012
          • 751
          • UK

          #24
          Re: Harman HA-7.1hd(stuck on the same volume)

          Has it ever controlled the rear and centers?
          Do NOT touch heatsinks when testing for voltages as they may be LIVE!

          Comment

          • Amraks
            Badcaps Veteran
            • Nov 2011
            • 725
            • Australia

            #25
            Re: Harman HA-7.1hd(stuck on the same volume)

            these people claim it has but I am unsure of that myself.

            No manuals, No idea of how it should work sucks.

            would swapping IC chips work if they are the same chip?

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #26
              Re: Harman HA-7.1hd(stuck on the same volume)

              Should do, assuming they are working & exactly same part.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • Amraks
                Badcaps Veteran
                • Nov 2011
                • 725
                • Australia

                #27
                Re: Harman HA-7.1hd(stuck on the same volume)

                this might be a good test to see if the ic chip that controls the main volume of the rear & center is gone.

                I will slip this out on the weekend.

                Comment

                Related Topics

                Collapse

                • crackedprint
                  Sony HCD-HX80R Amplifier Volume Control Problem
                  by crackedprint
                  I have a strange fault on a Sony amplifier. The volume control varies the display from MIN, then 1 up to 30 and then MAX as expected. At MIN there is no sound. However, at 1 it is quite loud and increasing above 1 does not change the sound level.

                  I have tried a Cold Reset as per the service manual.

                  I have looked at the I2C clock and data to volume control chip IC501 (BD3499FV). Data is only sent to IC501 when the volume is set to MIN or 1. At any other setting no data is sent to IC501.

                  I have looked all the way through the service manual and tried many online...
                  01-21-2025, 12:18 PM
                • redwire
                  Onkyo TX-SR607 replacement volume control encoder
                  by redwire
                  I had an Onkyo SR607 with a volume control encoder not working, turning the knob up the volume number would move around crazy and not work reliably.
                  Took it out and apart and no, it's not oxide or cleaning, lube required etc.- the metal is simply worn out. It's a 30mm part with metal bushing.

                  Volume control encoder Onkyo P/N 25065655W, Alps EC12E2425 is some oddball variant I could not find. I did the dig and tried replacement part Alps EC12E2420803 and it works/fits just like the original. Mouser 688-EC12E2420803 for $3.00
                  09-09-2022, 08:59 PM
                • madan1
                  Cambridge Audio azur 540r volume control problem
                  by madan1
                  Hi everyone.

                  I have a Cambridge Audio azur 540r and face the following problem - from time to time the volume can be set only to VOL MIN and VOL MAX ( from both the volume knob and the remote ).

                  The volume control IC is BD3816K1 and it is controlled by the CPU M5964C40J.
                  The volume knob VOL_A and VOL_B signal enters the CPU and is processed to VOL_DATA and VOL_CLK which go straight to the volume control IC ( I believe the remote control signal also goes the same way ).
                  The CPU is powered by a stand-by transformer with constant +5V ( 7805 ).
                  The VOL IC
                  ...
                  11-01-2018, 12:55 AM
                • Dannyx
                  Simple volume control for audio amplifier ?
                  by Dannyx
                  Good day folks. I want to run a Bose subwoofer and some random speakers on my PC at home. I don't have an amp for this project yet and I was looking for decent solutions and I figured I could very well run them on a car amp. Why not a regular hi-fi amp ? I figured a car amp would fit better under my desk. I looked at a Sony XMN1004 which is relatively affordable, yet of decent enough quality and with good reviews overall. Conveniently enough, this Bose Acoustimass 5 Series II sub (what a name) I have has two drivers inside, each with its own separate terminal, so I can hook it up to the Sony...
                  12-27-2020, 10:17 AM
                • BigOof
                  Marantz SR5007 popping on volume change and mute in Direct Mode
                  by BigOof
                  Hi,

                  I bought a used Marantz SR5007 and it's giving me some issues that I can't seem to really place. It functions well in most settings, ARC mostly works, it has no issues driving my speakers in any of the digital input modes, but I'm having issues running analog inputs in direct or pure direct mode. For some reason in this mode there's distortion for every volume increment I give it, but once the volume is stable it has no issues. Muting creates a loud pop, switching to another source also causes a pop and so does turning off the amp in that mode. Again, no issue in the digital modes....
                  12-12-2024, 06:15 AM
                • Loading...
                • No more items.
                Working...