Hi there guys,
Just wondering if anyone out there has had issues with a Marantz dvd/cd player. When you switch it on it says "welcome" then goes to standby. I have checked the usual cd switches for door and sled and they are working as they should. Voltages seem ok. A couple of voltages should measure 12v but are 11.5v, which I don't think should be a big deal. I have checked the caps ESR and they are fine. Next I will check capacitance as now I getting desperate.
I have also checked the "test" mode 1 and 2. Test mode 1 is ok. But I find test mode 2 doesn't do what the service manual says. Like after test2 ok I can press a sequence of buttons to reset the eeprom. I did change eeprom but still the same.
Has anyone out there had the same issue as my unit??
Regards,
aarty
Just wondering if anyone out there has had issues with a Marantz dvd/cd player. When you switch it on it says "welcome" then goes to standby. I have checked the usual cd switches for door and sled and they are working as they should. Voltages seem ok. A couple of voltages should measure 12v but are 11.5v, which I don't think should be a big deal. I have checked the caps ESR and they are fine. Next I will check capacitance as now I getting desperate.
I have also checked the "test" mode 1 and 2. Test mode 1 is ok. But I find test mode 2 doesn't do what the service manual says. Like after test2 ok I can press a sequence of buttons to reset the eeprom. I did change eeprom but still the same.
Has anyone out there had the same issue as my unit??
Regards,
aarty