hello.
the chip has completely blown and i am unable to see the number on the chip. any idea what chip this is?
the chip has completely blown and i am unable to see the number on the chip. any idea what chip this is?
Attached Files
-
-
this is the information i found about this ic.Attached Files -
-
any help?Attached FilesComment
-
-
I don’t think the whole top is blown off the 16 pin SOIC. Clean it with 99% alcohol and put it under a microscope and take a picture of it. Even partial numbers or manufacturers logo would help.
Upload some straight shot, high resolutions pictures of your board top and bottom side. Maybe somebody can trace things out…Comment
-
ive lost the chip.Attached FilesComment
-
-
better pictureAttached FilesComment
-
-
found pictureAttached FilesComment
-
-
201215v2.0
or maybe 201216v2.0?Comment
-
i found the number, but i don't know where the find the chip
17775908441Comment
-
You got a manufacturers logo?
This is a different number than you had on the picture.Comment
-
it's driving a triac, thats gonna narrow it down a lot!
Comment
-
Most likely there is a Chinese controller (similar to PIC) and it is most likely programmed.
https://aliexpress.com/item/1005006072335617.htmlLast edited by lotas; 04-28-2025, 04:00 PM.Comment
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
Hi
I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
The SPI chip is an Winbond 25Q256JWEQ model (1V8).
The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.
I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6... -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Long story short:
- dad converted Asus Chromebox CN62 into Windows compatible, with mrchromebox BIOS, years and years ago
- gave the computer to his son a couple years later
- son now decided to revert it to Chrome OS, to sell it as original (re-writing BIOS with the backup one created by his dad)
- too lazy to remove the board from the case, thought a voltage regulator was the BIOS chip (you know... it has 8 legs)
(seems like the story was not that short)
He used alligator clips to read the chip. No luck reading it. Removed chip and placed on a SOC-8... -
Hello, anyone here have updated ezp2023+ chip database in .dat file format.
I need to add w25q256jveq chip but I do not know what data should I type.
I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers
The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....11-25-2024, 12:53 AM
Comment