Philips Pronto TSU-9600 schematics

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mANgLEr
    Member
    • Feb 2023
    • 12
    • England
    #1

    Philips Pronto TSU-9600 schematics

    I have a faulty professional remote control. There appears to be no life in it when connected to its battery. I have a service manual but it goes into almost no detail beyond pin layouts of the dock connector and how to disassemble it to replace the touchscreen unit. I am hoping someone has access to a full service manual with schematics and/or a boardview file.

    My initial diagnosis finds no issues. Power is getting from the connected Li-Ion battery to the PCB. I can charge the battery okay via the PCB, it starts at about 700mA when flat and is trickling when the battery is over 4V. Random probing around the board does not give me any surprises or short circuits, but then I don't know what to look for really.

    Any help appreciated. I can post pictures of the PCB if that is likely to be any help.
    Tags: None
    • mANgLEr
      Member
      • Feb 2023
      • 12
      • England
      #2
      Re: Philips Pronto TSU-9800 schematics

      Oopsy, I posted the wrong model. It's a TSU-9600 I have.

        Comment

        • CapLeaker
          Leaking Member
          • Dec 2014
          • 8340
          • Canada
          #3
          Re: Philips Pronto TSU-9800 schematics

          Probably not booting correctly due to corrupt firmware, bad nand or something along those lines. It’s just me guessing. See if there is a place for a TTL on the board. If so hook a TTL up to it and check if there is a kernel panic or whatever is going on with it. Upload some straight shot, high resolution pictures using the attachment function in the post.

            Comment

            • mANgLEr
              Member
              • Feb 2023
              • 12
              • England
              #4
              Re: Philips Pronto TSU-9800 schematics

              Thanks, I'm fairly certain it has UART so will try that next, and will also take some decent pictures.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • alro7779
                  Philips 32PFL4901/F8 BA4GF0F0102 2 Not getting standby led
                  by alro7779
                  Hello, guys!

                  The same 32" Philips TV I was having video issues, but now I don't have standby led at all. Someone here shared with me the schematic of the power supply, and checking the voltages, I see right after the resistor R604 I'm getting 1.6 v which is too low for enabling the Gate of the Q601 mosfet (the diagram says 4.2). On the R614 resistor I'm getting 181 V in and 117 V out, then through R603 I'm getting the same 117 V in and 59.9 V out, finally getting the latter voltage in the R604 BUT getting just 1.6 V out, which is the voltage that goes on to the Gate of the Q601...
                  09-14-2025, 12:25 AM
                • G33RT
                  Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                  by G33RT
                  Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                  It does power up when pressing the power button.

                  I already try the power button while plugin the plug with no result.
                  Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                  Could this be an PSU or eMMC issue ?
                  07-19-2025, 03:43 AM
                • Popalwali
                  Asus Nexus 7 2012 (ME370T REV 2.4) Schematics needed
                  by Popalwali
                  Hello Everyone,

                  I will be really grateful if someone shares schematics and if possible the boardview of the old Asus Nexus 7 (2012) Tablet. The motherboard is ME370T Rev. 2.4. Now I can find schematics for the Rev. 1.0 but I could not find the schematics for the Rev 2.4. I tried to look for similarities in the Rev. 1 but there are somethings missing, plus the board i have has nearly no component names printed on it which as a newbie makes pretty hard for me to locate things. Any assistance will be appreciated. Thank you.
                  08-25-2024, 11:28 AM
                • Techmanx
                  Schematics Download Site
                  by Techmanx
                  If anyone needs schematic diagrams for any pro audio gear like what professional musicians use, such as guitar amps, power amplifiers, vintage tube amps, musical gear like keyboards, effects pedals, guitar wiring diagrams and service manuals, check out https://schematics.ca . I'm a road musician and an electronics tech and I got schematics for just about every piece of gear in my band from this site and they are free to download. It's always good to be prepared in case you fry something while on on the road, which always happens it seems. https://schematics-free.com has a lot of free audio schematics...
                  06-28-2023, 12:08 PM
                • Plg_666
                  Need schematics of Msi claw a1m
                  by Plg_666
                  Hello, comrades. I've encountered the following issue. I live in a small town, and we had a power outage. My girlfriend's MSI claw was unlucky because it was charging at the time and didn't turn on afterward. The local service center suggested replacing the Tps65993bh controller. However, after replacing it, the motherboard still didn't start. The technician believes that the processor might be dead, but he needs the motherboard's schematics to confirm this. Please share the motherboard schematics if you have one for this console or a laptop with a core ultra 5/7 125H/155h processor.
                  Today, 01:35 AM
                • Loading...
                • No more items.
                Working...