Re: Any ideas Please?
R_J thanks
Let me try to understand the crossreference nomeclature
R_J thanks
Let me try to understand the crossreference nomeclature
-
I finished my work for this year, so I'm free until January 6th.
My last task it's unresolved and I'm looking for ideas for the return in January.
So what's about...
This laptop is booting in 3-4 seconds has no password and every voltage is present. So far so good.
My problem is that it doesn't boot from anything. !...just stays with a blank screen(backlight only)
No USB boot (in fact partially no boot...), no PXE boot nor boot from M2.SATA or NVME...crazy...
The Ventoy USB (EFI) boots in the menu system but after selecting one of the ISO (like a simple... -
Hello Everyone,
I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.
Symptoms:- Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
- Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
- I swapped the Left and Right surround
-
I bought "ADATA C008 / 16GB" USB Flash Drive yesterday, and I'm curious about meaning and usage of this 10-characters number and 4-charatcer string on USB Standard-A, "male" plug. -
Good morning, I signed up for this forum because I need help fixing my LogitechG502 Lightspeed.
So I got a cheap used G502 under the pretense that the USB was busted and while it would charge, on wired mode it would not work, windows would not recognize it, or even give the little jingle when plugged in... but it would charge.
So I think "ok challenge accepted, it's probably that the data bus on the usb is busted. I solder in a new one and I get a cheap wireless G502 that I've been wanting for years!"
Nope, wireless doesn't work either, G-hub detects... -
Hi there.
Got dongle with water damage. All corrosion cleaned and broken traces repaired. But I have 3 missing components marked as "PB" it looks like diode but don't know how to find a proper replacement. Please help and thanks in advance...
Comment