BRD file structure

[jasko_jacker]

I don't know if this is the correct place to ask about boardview software but
I'm trying to figure out how openboardview software works; at the moment I'm concentrating on first version on visual c++ 2019.
before analyzing the structure of the application I would like to understand the meaning of the data contained in a brd file
I have decoded this format with using a code taken from github, I don't know if the result is correct but
I have decoded this file (LB# 820-2879 ''Board View'' file.brd) and I think it should contain the following data:
1 - number of component on a board
2 - coordinate to locate the single component, the test point, etc
3 - the component type, for example SOT23, SOT323, etc
4 - the number of pins for each component
5 - connections (net) between a pin to another pin
etc
I know the imgui is used to manage the graphics but I don't see any info about the type of component to draw
In the picture I post, there is an extract of the decode BRD file (apple), someone can hel me to understand
the structure of the file?
thanks

[imranromi]

Re: BRD file structure

@piernov know about this many as i know

[jasko_jacker]

Re: BRD file structure

I know, but I didn't want to disturb him in private, I hope he gives me the information I'm looking for

[stj]

Re: BRD file structure

ask paul daniels - he regularly livestreams on youtube.

[jasko_jacker]

Re: BRD file structure

Thanks