Pioneer PDP-R06 HDMI ports

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia
    #1

    Pioneer PDP-R06 HDMI ports

    This topic is not about troubleshooting TVs and video sources, but it is a technical discussion.

    On a Pioneer Media Receiver, model PDP-R06G, only one HDMI input was fitted, despite the board having provision for components for a second HDMI input and the HDMI receiver IC (Silicon Labs Sil9021CTU) having the same provision thereof.

    I still wonder why Pioneer did not install the components for the second HDMI input (it would only cost about $5 extra)... installing these components would require changes to system software to implement the second HDMI input selection.
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
    Tags: None
    • rhomanski
      nowhere man
      • Dec 2009
      • 5157
      • U S of A
      #2
      Re: Pioneer PDP-R06 HDMI ports

      I have a couple amplifiers like that. One has the copper runs and holes for a two pole relay to pass the audio. They only installed a single pole. I put a two pole in just in case one set of contacts gets dirty. The other amp has provisions on the board for two relays so you can hook up two sets of speakers, they only installed one relay and make you send the signal to the pre-amp where it's paralleled to go to two sets of speakers. If you hook up to the power amp you only have one speaker out. Makes no sense to me.
      sigpicThe Sky Is Falling

        Comment

        Previous template Next

        Related Topics

        Collapse
        • RatherLoopy
          Pioneer VSX-44 receiver HDMI dropouts
          by RatherLoopy
          I have an older Pioneer receiver (VSX-44) that's been dropping the HDMI output (black screen) for a few seconds every few minutes. Setup is HTPC -> Pioneer DVD HCMI in -> Pioneer HDMI out -> Samsung TV HDMI in, all with cheap HDMI cables that have never caused trouble before..

          I initially found a lot of play in the receiver's HDMI inputs and output so I kind of squeezed them back into shape and they're making a tighter connection, but the problem persists.

          And also, often, the HDMI will drop out in exactly the same way (black screen) just as my central air...
          05-26-2023, 03:54 PM
        • Servicem4
          Pioneer lx 701 hdmi issues
          by Servicem4
          My receiver pioneer LX 701 doesn't work anymore correctly The history:
          6 month ago hdmi picture output didnt work anymore but music input through hdmi still worked.

          Since some weeks even this doesn't work. Right Before this occured i heard a plopping noise from the receiver one evening.

          The rest of the receiver works, I used spdif for sound input.

          I now opened the receiver and hoped to find a blown fuse but all look good.

          Any tips how to progress? Between 2 PCB there is something which looks like a blown cap....
          20250527-204839 hosted at ImgBB
          https://ibb.co
          Image 20250527-204839 hosted in ImgBB
          05-27-2025, 01:13 PM
        • CDNBrewer
          Running out of Ideas, hoping someone smart can provide some for my ONKYO TX-SR353 Receiver
          by CDNBrewer
          Hello Everyone,

          I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.

          Symptoms:
          • Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
          • Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
          • I swapped the Left and Right surround
          ...
          08-05-2025, 09:29 PM
        • spleenharvester
          Toshiba 50UL2063DB randomly rebooting with HDMI-CEC and/or HDMI-ARC enabled
          by spleenharvester
          I have this TV hooked up to only an AppleTV 4K and a Creative soundbar. Originally HDMI-CEC and HDMI-ARC wouldn't work at all, I replaced all the HDMI cables with decent UGREEN cables meeting the latest standards, now it all works perfectly but once or twice a day the TV itself reboots while watching a program, the AppleTV keeps running. I haven't fully pinned down whether it is ARC or CEC causing it yet. All are running latest firmware.

          I assume it is just HDMI-CEC being buggy as usual on a shitty Vestel machine, but can anyone think of anything I can try before disabling it?
          03-12-2025, 03:42 PM
        • RossMoodley1967
          LG LCD TV HDMI PORT FAULTY
          by RossMoodley1967
          LG LCD TV picture comes on intermittenly using hdmi port.The sound is on permantly.The hdmi ports looks fine and soldered in securely.The 3.4v coming to the main board is not present(not sure if will affect the hdmi port or where that voltage goes.)The hdmi cable is fine because it works on another tv.The ceramic caps connected to the hdmi controller ic is reading 39 ohms.Could the hdmi controller ic be faulty(feels very warm to touch).The RCA jacks work normally .Thank you in advance for your assistance..
          02-28-2024, 08:38 AM
        • Loading...
        • No more items.
        Working...