Unkown smd part D14JL

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • neo2010
    New Member
    • Jan 2016
    • 5
    • Germany

    #1

    Unkown smd part D14JL

    Hello, I need help identifying 2 blown parts from a Li-Ion battery charger (XTAR VC8). It has slots for 8 batteries charging up to 2A. I removed the blown parts in the picture already, but they are ale the same on this side of the pcb. It's a sot-23 housing with the label D14JL as they are used to drive the coil, they might be mosfets, but the internet gave no hint. I would be pleased if someone has any glue with part this could be.
    Thanks in advance. Regards Timo​
  • kasfamily
    Badcaps Veteran
    • Aug 2014
    • 765
    • Russia

    #2
    Click image for larger version

Name:	CD13A567-0F8A-4AE8-8C30-DC09243AFF84.png
Views:	53
Size:	284.8 KB
ID:	3291073 Hi, may be …

    Comment

    Related Topics

    Collapse

    • swerg
      Part selection for possible blown inductor on ASUS GX531-GW-AB76 laptop mobo
      by swerg
      Hey everyone,

      I'm a novice trying to repair my laptop. The LCD screen has an image, but no LED backlight for the image. It also produces an image when connected to an external monitor.
      I have found what I believe to be a blown inductor labeled "L4502" and "120 Ohm" in the schematics (zoomed in image, blue arrow to blown component). I have included an image of the general area of the mobo and an excerpt from the schematics as well.
      I am having trouble selecting a replacement component, which I believe to be a 120 Ohm ferrite bead, from the components...
      06-06-2024, 03:39 PM
    • H H
      3090 FE Part Confirm/Identification
      by H H
      Hello,

      I'm hoping someone could help me confirm if I have identified the following parts correctly.

      Apparently the DP cable became stuck inside the graphics card and was yanked out. This caused some sort of short which burned the DP contacts and blew some resistors and ferrite beads.

      The parts needing replacement are on the back of the board behind the HDMI input.

      I have identified the parts as the following:

      C6037: MLCC 0.1uf/16v(0402)x7R W05

      R6016: RES 499 OHM 1/16W (0402) 1%

      LB10911: Ferrite Bead (0402)...
      02-16-2025, 01:09 PM
    • ibo
      MSI GS75 10SF-227 Stealth identifying Blown part
      by ibo
      Hi guys,
      Hope someone can help me out here. i have this laptop and it wont Boot.
      now i found this blown part from motherboard but i dont know what it is and what the model nr is to order a new one. i didnt found schematics or boardview for this model. I think PU33 is the same chip....
      03-02-2023, 02:06 PM
    • Fr3shGy
      Samsung U32D970 PSU blown up (Identifying Parts)
      by Fr3shGy
      Hi, my U32D970 PSU (BN44-00786A) has blown up. It went out with a loud bang.

      One of the N-Channel Mosfets (OM802C) caused a short and fried the trace and its components connecting to one of the pins of the 6A01 IC.

      I need help to identify 2 SMD resistors which lost their markings
      highlighted in picture 3 (RM812 and RM808).

      Maybe someone can help me identify them, has a schematic or can give me some advice. would be much appreciated.

      6A01 IC datasheet ( https://www.fujielectric.com/company...4-245-2013.pdf )...
      03-25-2023, 01:58 AM
    • vidvansh
      Dell Latitude 5500 EDC41 LA-G891P - Parts help
      by vidvansh
      I was trying to remove bios password from my dell latitude 5400 by removing and programming BIOS chip and i accidentally blown away 1 part above the BIOS chip which i think is a resistor. I looked at boardview of it and i came to a part R_0201.
      Can anyone help me figure which part should i order to fix it or will there be any workaround to run the laptop.
      I have attached the image of the part which i am missing....
      06-10-2025, 06:24 AM
    • Loading...
    • No more items.
    Working...