Help me identify this component

[mzs]

Please help me identify this component:



Color code: orange, blue, silver (white?), gold

I have two of them in a water damaged "High voltage killer" (to avoid electric problems in cars during welding), connected to the suppressor diodes.

One is totally broken, and on the other I can measure about 3.2 Ohms resistance.
Based on the color it should be 0.36 Ohms. I am really confused.

Any help would be much appreciated.

Thanks,
mzs

[selldoor]

Re: Help me identify this component

Did you test off the board? if it is a melf resistor .36 is correct unless I have my 00000s mixed up

[budm]

Re: Help me identify this component

How it is connected in the circuit may help determine the value and what it is.

[mzs]

Re: Help me identify this component

Did you test off the board? if it is a melf resistor .36 is correct unless I have my 00000s mixed up

How it is connected in the circuit may help determine the value and what it is.

I have measured the 3.2 Ohms on the desoldered component.
Otherwise I suspect that these resistors are used as fuses.

[budm]

Re: Help me identify this component

Pictures of the whole board?