soldering station

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • multimeter
    Badcaps Veteran
    • Jan 2011
    • 739
    • united kingdom

    #1

    soldering station

    what do you guys think of this station?,http://www.ebay.co.uk/itm/NEW-Digita...#ht_2979wt_754
    bought a couple of things from them,always good service and half decent products
    fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

    ----------------------------------------------
    please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!
  • mariushm
    Badcaps Legend
    • May 2011
    • 3799

    #2
    Re: soldering station

    It's a rebranded ATTEN AT938D : http://www.atten.eu/index.php/solder...150-450-c.html

    It's an OK soldering station.

    I would try to check if it accepts Hakko tips - some Atten models do, some don't... and Hakko tips you can find easily.

    Comment

    Related Topics

    Collapse

    • sam_sam_sam
      Modification to a ZD-987 desoldering/soldering station using a external switching power supply
      by sam_sam_sam
      I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

      I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
      07-01-2024, 06:34 AM
    • chth96
      What soldering station should I purchase for 900M-TJ-I tip?
      by chth96
      hello.
      A few months ago,I have purchased 0.1mm Soldering Iron Tip of below aliexpress link,But I noticed that It is totally impossible to use this 0.1mm iron tip in the T12 soldering station
      https://ko.aliexpress.com/item/4001275635593.html
      Is there any good soldering station which is possible to use 900M-TJ-I tip and have inexpensive or reasonable price in aliexpress?
      Any reply would be appreciated.
      11-24-2023, 05:08 PM
    • mkbehbeh
      KSGER C245 Soldering station PSU 220V only?
      by mkbehbeh
      I purchased this soldering station when it was on sale at amazon. It had a slew of one star reviews, but the price was low enough that even if the controller and PSU were toast, the handle tips and stand were worth more than the price. All of the reviews mentioned that the unit was either DOA, or died on the first use. I looked on Aliexpress and the first clue was that KSGER still sold the 220V version of this station, but all of the 110V versions had been discontinued. I figured That there was a problem with the 110V on the power suppply and the controller would be fine.

      I am...
      04-17-2023, 03:11 PM
    • deep000
      Looking for a budget hot air soldering station for hobby use
      by deep000
      Hi,
      I'm looking to get on Aliexpress a hot air soldering station for hobby use, nothing too fancy, just something "reliable" and budget-friendly.
      Any recommendations for a "good" cheap one that gets the job done?
      Thanks in advance
      04-25-2025, 02:29 AM
    • nbdy
      QUICKO soldering station
      by nbdy
      HI,

      Have a QUICKO soldering station with no numbers for the model ... (think it's a KSGER or similar copy)

      All worked nice, till some day it heats the iron till it was RED (HOT) ...

      Turned it off, and tryed today again, and all the same, even with a second iron ...

      The display shows that the iron is not connected, like not inserted in the handle ...

      The second thing is that it has 6 pins connector and can't find a handle that is similar for my station ...

      Has someone some advice what to do, where to look, even how to...
      01-07-2024, 05:44 PM
    • Loading...
    • No more items.
    Working...