Inductor 'polarity' ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Agent24
    I see dead caps
    • Oct 2007
    • 5008
    • New Zealand
    #1

    Inductor 'polarity' ?

    Just noticed an inductor I bought has a short lead and a long lead.

    Does this indicate something? All I can think of is winding direction or such, but does that actually matter?
    "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
    -David VanHorn
    Tags: None
    • momaka
      master hoarder
      • May 2008
      • 12175
      • Bulgaria
      #2
      Re: Inductor 'polarity' ?

      As far as I know - no. That's probably just how it came out of the factory.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • momaka
          Corsair CX750M [Model 75-002019] - burned output toroid inductor
          by momaka
          Looks like I may need a little help from the PSU experts (or anyone really! ) I have a Corsair CX750M (Model 75-002019) that I picked up for free about 4 years ago. This is the PSU:



          So here’s what’s strange about this one: it appears to work normally (normal output voltages) and any PC is stable with it. However, after a while (typically 10-20 minutes, but time can vary depending on the load), there is a sweetish smell of burned magnet wire insulation emanating from the PSU. Upon opening the PSU after this happened (many times), I was able to confirm...
          09-19-2021, 08:44 PM
        • Bartoloni
          Lenovo S145 -15iwl vcore inductor warm.. looking with oscilloscope there is a spike.
          by Bartoloni
          Hi, i have a Lenovo S145 that after 20 seconds shutdown and restart (it's working correctly on thse 20 seconds)
          everything seems ok, but on Vcore inductor ( this is an i3 with just 1 switching power supply for CPU)

          there is an output to teh CPU with a spike.. seems that inductor can't handle the input...
          replaced the capacitor (330) and the inductor (R15) without any change
          any idea? very thank you!

          input of the inductor seems as usual... only strange thing is that the upper/lower voltages seems to be 21V (main power line is 19.3) ... but not sure this...
          12-09-2024, 12:42 PM
        • badcap111
          How to read inductor specs?
          by badcap111
          I have a broken samsung galaxy s10 with missing inductor. I want to replace the missing inductor and I have found some vendors. But I don't understand how to read the specifications of the inductor. The specs are:

          INDUCTOR-SMD;470NH,20%,2520,T0.8,0.029OH

          I understand that the inductor is 470 nH with 20% margin, and the size is 2520 or 1008 (imperial measure), but what do T0.8,0.0290OH mean? I can't find any explanation on the web.
          09-12-2023, 01:25 PM
        • Dev Goose
          Help Needed: Reverse Polarity Issue on HP EliteBook 840 G4 – Where Do I Begin?
          by Dev Goose
          Hi everyone, I recently acquired an HP EliteBook 840 G4 (6050A2854301-MB-A01) that I'm hoping to bring back to life. I'm fairly new to laptop repairs but eager to learn and willing to put in the effort to understand and fix this. Any advice or guidance would mean a lot!


          What Happened
          The issue started when the laptop was accidentally plugged in with reverse polarity. Before this incident, the laptop would show a power/charging light whenever it was plugged in. However, now it's completely unresponsive—no lights, no power, nothing. I've been doing some research and understand          ...
          12-13-2024, 03:13 AM
        • rashidjafar
          Nvidia GTS 250M Laptop graphics - Inductor and Capacitor values
          by rashidjafar
          I am looking for capacitor & Inductor values for my TOSHIBA Qosmio X500-110 - mobile graphics - Nvidia GTS 250M Laptop.

          Values for :-
          =========
          PC43 : Capacitor [3x1.5mm]
          PL7 : Inductor [2x1mm]
          PC39 : Capacitor [1x0.5mm]

          Any ideas would be appreciated.




          I can get Capacitor values from nearby components but wanted to know the max ratings also I dont have equipment to measure inductors....
          08-07-2025, 05:10 PM
        • Loading...
        • No more items.
        Working...