Basic electronic knowledge resources

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • swofra
    Member
    • Jun 2020
    • 25
    • usa

    #1

    Basic electronic knowledge resources

    Hey all,
    I've got a few XBOX power problems but don't know much about anything concerning electronics troubleshooting outside of replacing caps. Instead of coming on here and wasting people's time being confused when they say check rectifier, transistor, resistor, etc or whatever it may be and then having to ask "what is that?", I wanted to learn and build up a knowledge base first so I'm not completely clueless and can apply the good advice people give without confusing the situation more by not knowing what i am doing.
    Is there a good thread or source, either on this wonderful site or another site, that teaches the noobest of noobs the basic power supply and mobo components, their functions, and how to test them with a simple DMM? That way I can contribute to solving my own problems.

    Thanks!
    Last edited by swofra; 11-07-2023, 06:55 PM. Reason: clarity
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4423
    • United Kingdom

    #2
    Re: Basic electronic knowledge resources

    http://www.falstad.com/circuit/e-pnp.html

    Comment

    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30934
      • Albion

      #3
      Re: Basic electronic knowledge resources

      watch diode gone wild videos on YT - he will teach you more about switching psu's than the rest of the web combined!

      are you talking original xboxes or 360's or newer?
      the microsoft naming causes a lot of confusion

      Comment

      • harp
        Badcaps Veteran
        • Jun 2022
        • 590
        • Planet Earth

        #4
        Re: Basic electronic knowledge resources

        Diode gone wild is so detailed that easy can confuse beginers

        You have to learn basic to can follow sugestions:

        Basic identification of elements, and some properities, so to know of what is reffered to
        Basic usage of measurement testing devices, dmm and supply, what you can do what you cant even think to do
        Basic soldering skill, that you can desolder, test, solder again any component

        You can try to follow Sorins chanals for begginers, just watch from beggining to end (it is open recently), and try to practice on scrap board, test board and understand principes. Sorin is a good teacher but it is his wiered, not-so-sistematic way to present... but it is from my perspective, maybe is ok to you.
        https://www.youtube.com/@sorinelectronics/videos

        Xboxes put aside awhile and practice repair on one or two layer board first, to learn principes and experiance.
        Last edited by harp; 11-08-2023, 08:49 AM.

        Comment

        Related Topics

        Collapse

        • Fenzon
          Samsung UE43NU7122 has Picture, but no Backlight
          by Fenzon
          Greetings fellow DYIers, the moment I discovered this community forum, nostalgia has hit me pretty hard, this early web 2.0 look and feel is close to home. I can't describe my happiness seeing active forums that survived today, and its not just yet another centralized propriety subreddit.

          Before I describe my issue with this particular TV, I would like to let you know that I do have basic electronic competence, and some electronic component knowledge. I also am an electrical installation technician student, although we exclusively study alternating currents and our primary...
          09-26-2023, 03:17 AM
        • dicky96
          Air Con PCB repair : some general question
          by dicky96
          Hi guys
          I've been getting more air con controller boards of various brands for repair - mainly the ones from the outdoor compressor unit and I realise I have a lot of gaps in my specific knowledge, while being pretty good at electronic repair in general.

          Does anyone know of any good resources for information on this sort of repair? I'm hoping here there will be some guys who are experienced in this. I'd specifically like more info on how the controller PCB works, because I expect they are all pretty much the same, and especially how it communicates with the indoor unit (protocols,...
          11-22-2024, 04:40 AM
        • rcr66
          by rcr66
          Hello all
          - I've been tinkering with computers since the early 80s. I remember using odd antiquities such as 5.25" floppy disks, an Amstrad 256, a Sinclair ZX80, a Tandy Model 4 (which I used to sell at Radio Shack) and of course both the Commodore 64 and an Amiga 2000 (which I still have). I learned basic electronic in high school (2 yr vocational radio and TV course) and have used that knowledge to attempt repairs on all types of amps, radios - anything with a circuit board, that is until LSI and SMD made discreet components a thing of the past.
          - I'm a retired military online...
          01-17-2024, 12:53 AM
        • sam_sam_sam
          Electronic Goldmine has replacement Irons for the ZD-978 or similar model number this the one that has the sleep function
          by sam_sam_sam
          This is a new item at Electronic GoldMine that has arrived within the last few weeks

          Here is the link for them I know for sure that it works because ( I tried it on mine soldering station ) I bought two of them and I just bought two more of them so I have some extra replacement ones in my parts bin

          Stahl Tools DDDS Replacement Iron for DSDS Stahl Solder Station
          https://theelectronicgoldmine.com/products/g28392

          One note it will not work for the ZD-917 or similar model number that does not have the sleep function that are the same iron but the plug only...
          11-24-2024, 01:25 AM
        • alphaedrum
          Acer N19C1 / FH5LA LA-J801P Board wont turn on
          by alphaedrum
          Hi, first of all Im still learning and any advice is very welcomed. Also have me a bit of patience with all of this please and sorry for the butchered english.


          I have very, very basic electronic knowledge but I decided to learn a bit with this dead board since I got it for free so there is nothing to lose if it goes south plus I can learn in the process.

          The laptop suddenly stopped turning on, and the ownder didnt cared enough to get it fixed. Also the charging led doesnt turn on either.

          This is what I have already done with the board:
          After...
          03-26-2022, 06:08 PM
        • Loading...
        • No more items.
        Working...