Need software for Intelligent universal programmer lk48

[stj]

Re: Need software for Intelligent universal programmer lk48

you also need to know if the cypress has a custom VID/PID number in it's eeprom

[zjta0k]

Re: Need software for Intelligent universal programmer lk48

No idea about the PCMCIA or the Cypress?
Does someone have an UXP and can map the CYpress chip connections (on the i/o side)?

[stj]

Re: Need software for Intelligent universal programmer lk48

no idea - probably not because the software has the damned driver built-in.

[zjta0k]

Re: Need software for Intelligent universal programmer lk48

Does someone know if a PCMCIA (Not PCI-Express) parallel adapter works with the labtool software?
And what about the USB2LPT (https://www-user.tu-chemnitz.de/~heh...index.en.htm)? Is it usable? Seems to use the same Cypress device (CY7C68013A) that the UXP uses.

[zjta0k]

Re: Need software for Intelligent universal programmer lk48

Thanks!

[stj]

Re: Need software for Intelligent universal programmer lk48

it's not a fixed version, it's a patch.

download version 10.50 - it's the newest i cracked.
install it.
then open the exe in a hex editor and change the byte at location 0x01e433 from 55 to c3.
then save and your good.

[zjta0k]

Re: Need software for Intelligent universal programmer lk48

@stj: Could you send me the fixed software for the 48XP that is mentioned in the first page of thread? TIA.

[stj]

Re: Need software for Intelligent universal programmer lk48

if it's parallel-port then this can fix it.

[bootboy]

Re: Need software for Intelligent universal programmer lk48

All my port is ECP , i used 4 pc it all ECP .

first question, which os are you running on your PC?

Hi, i've three labtool48 programmer, and there's no official/legit way to make them work under windows xp+ OS

the latest software taken from dataman, aec or other pseudo manufacturer is the v4.67

running the software under windows xp didn't recognise the programmer at all, same gear but different os like windows 2000 works great.

so i didn't remember now because i have a dedicated setup for eproms programming but you can be succesful running the programmer within windows xp too even in a virtual machine.

first try to set the compatibility mode of the programmer .exe software to windows 2000 or windows 98, and give it a shot.

if this didn't work you should try the programmer on a real win 9x/2000 environment and be sure that it's working.

by the way hacking the software or patching the firmware inside the programmer should do the trick.

before proceeding further let us know.

[stj]

Re: Need software for Intelligent universal programmer lk48

so change the setting then.

[hbest]

Re: Need software for Intelligent universal programmer lk48

Change port settings to above in BIOS settings & try it out

All my port is ECP , i used 4 pc it all ECP .

[megaraider]

Re: Need software for Intelligent universal programmer lk48

In BIOS settings try changing the LPT port mode to EPP.
Also make sure LPT1 is set to port 0x378.
Make sure you're using a full EPP wired cable.
Ensure you're using the LPT port software version 'WLT48XP' [not the USB version (WLT48UXP)]!

is your port set in the bios to EPP ?

no it 's ECP , one chose in bios ECP

Change port settings to above in BIOS settings & try it out

[stj]

Re: Need software for Intelligent universal programmer lk48

i think EPP was mentioned on the website,
also try running it as administrator - i'v seen some firewall/security software block the ports on windows.

[hbest]

Re: Need software for Intelligent universal programmer lk48

is your port set in the bios to EPP ?

no it 's ECP , one chose in bios ECP

[stj]

Re: Need software for Intelligent universal programmer lk48

is your port set in the bios to EPP ?

[hbest]

Re: Need software for Intelligent universal programmer lk48

i used all the version dataman but still the some problem

[stj]

Re: Need software for Intelligent universal programmer lk48

Dataman 48 is the same programmer
https://www.dataman.com/dataman-4848lv-resources

[stj]

Re: Need software for Intelligent universal programmer lk48

you need to search it or contact advantech
http://www.aec.com.tw/contactus.htm

[hbest]

Re: Need software for Intelligent universal programmer lk48

Labtool 48 is NOT Labtool 48xp,
it's much older.
the last software release was dated 2003.

can you give the right soft and thank you .

[stj]

Re: Need software for Intelligent universal programmer lk48

Labtool 48 is NOT Labtool 48xp,
it's much older.
the last software release was dated 2003.