User Profile

zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

07-23-2021, 04:50 PM
Re: Need software for Intelligent universal programmer lk48

What do you mean?

I had the impression that the frequency of the 2nd check increased along with the counter in the bottom right, I.e. at first it wasn't so bad, but the more devices you programmed the more frequently the check came up.

I agree that when programming 1/2 devices it's not a big problem, but sometimes the check happens midway during operations, so your part (programming) will fail. ...

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

07-22-2021, 05:25 PM
Re: Need software for Intelligent universal programmer lk48

Unfortunately it looks like the protection isn't as easy to defeat...
After a while I've noticed the cracked program started to fall back to demo mode, at first I thought it was phoning home, but it isn't the case.
This happens also with 10.50: Initially it appears to work OK, but program/verify/compare a couple of devices and eventually will stop working.

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

04-10-2021, 02:37 AM
Re: Need software for Intelligent universal programmer lk48

I looked at what you did in 10.50, and was able to replicate in some other versions.
But the latest versions were different because the strings are located in another area (sorry can't explain exactly I don't know much about how PC software works), and debugger couldn't find the strings, but then found a way.
So credit is 99% yours, Thanks!

Forgot to point out that is for the XP version, not the UXP.

See more | Go to post

Last edited by zjta0k; 04-10-2021, 02:39 AM.
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

04-09-2021, 03:37 PM
Re: Need software for Intelligent universal programmer lk48

Change offset 03CDD0 of the executable from 55 to C3....

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

03-23-2021, 04:12 PM
Re: Need software for Intelligent universal programmer lk48

Nope.
I know that there are two versions (XP and UXP) of the programmer, the reason I am interested in an USB solution is just for convenience, NOT speed.

I asked about the PCMCIA and the USB2LPT because these seem two cheap solutions (if they work), then I noticed that the UXP uses the Cypress chip to add USB connectivity and asked if someone has more info about how it's connected internally.
I assumed it was used as an USB to parallel converter, so *possibly* it would be a...

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

03-19-2021, 03:50 PM
Re: Need software for Intelligent universal programmer lk48

I thought the VID/PID were known

But anyway it wouldn't work, as the software would want an UXP to connect to....

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

03-17-2021, 01:48 PM
Re: Need software for Intelligent universal programmer lk48

No idea about the PCMCIA or the Cypress?
Does someone have an UXP and can map the CYpress chip connections (on the i/o side)?

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

03-17-2021, 12:25 PM
Re: Need software for Intelligent universal programmer lk48

Does someone know if a PCMCIA (Not PCI-Express) parallel adapter works with the labtool software?
And what about the USB2LPT ([url]https://www-user.tu-chemnitz.de/~heha/basteln/PC/USB2LPT/index.en.htm)?[/url] Is it usable? Seems to use the same Cypress device (CY7C68013A) that the UXP uses.Re: Need software for Intelligent un...en.htm)?[/url]

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

03-08-2021, 04:40 AM
Re: Need software for Intelligent universal programmer lk48

Thanks!

See more | Go to post
Leave a comment:
zjta0k replied to Need software for Intelligent universal programmer lk48

in Equipment Usage, Soldering, Techniques, and Reviews

03-07-2021, 07:16 PM
Re: Need software for Intelligent universal programmer lk48

@stj: Could you send me the fixed software for the 48XP that is mentioned in the first page of thread? TIA.

See more | Go to post
Leave a comment:

No activity results to display

Announcement

Profile Sidebar

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment:

Leave a comment: