Hi
I used my newly purchased Mastech MY68
https://www.badcaps.net/forum/showthread.php?t=5700
to test an Asrock 775V88+ Mobo xtal
https://www.badcaps.net/forum/showth...4026#post54026
It appears the 32.768kHz xtal is faulty and will be replaced.
However to test the other xtals on system boards such
as the typical 14.18 and 25MHz xtals I will require, if possible,
to get source a meter with a frequency range up to 30MHz
What would forum members recommend?
A mmeter such as specified or, spend the money on
a bench freq test unit and/or
a scope?
Thanks
I used my newly purchased Mastech MY68
https://www.badcaps.net/forum/showthread.php?t=5700
to test an Asrock 775V88+ Mobo xtal
https://www.badcaps.net/forum/showth...4026#post54026
It appears the 32.768kHz xtal is faulty and will be replaced.
However to test the other xtals on system boards such
as the typical 14.18 and 25MHz xtals I will require, if possible,
to get source a meter with a frequency range up to 30MHz
What would forum members recommend?
A mmeter such as specified or, spend the money on
a bench freq test unit and/or
a scope?
Thanks
Comment