CH341a SPI / I²C programmer

[megaraider]

Re: CH341a SPI / I²C programmer

now as far as the memory programmer goes, the versions up to 1.18 just work
versions from 1.20 onwards need to be registered.

and i have 1.18 and 1.29 if anybody needs them.
------------------------------------------------------------------

Don't seem to be able to get a working 'registered' 1.29 version...
Could you share your 1.29 version, please.
Thanks.

[stj]

Re: CH341a SPI / I²C programmer

i dont have a "registered" one.
i cant hack it because it's compressed.

you can run it in trial mode but i dont think it works long like that.

[megaraider]

Re: CH341a SPI / I²C programmer

Thanks stj

[ouhid2004]

Re: CH341a SPI / I²C programmer

Hello
I have a program that is not register how to register

[ouhid2004]

Re: CH341a SPI / I²C programmer

hello
i have a program that is not register how to register

105a-4e4b-4f7d-5e3c-9da0-803e-6517-3b4d-e490-b875-14f9-3c63

[yawarniazi]

Re: CH341a SPI / I²C programmer

i dont have a "registered" one.
i cant hack it because it's compressed.

you can run it in trial mode but i dont think it works long like that.

Can anybody tell me the key to register this software? I need it very urgently as a W25Q64FV chip is here waiting to be reprogrammed, in old versions there in the list I can see only W25Q64BV.

Please please give me key to register this software very urgently.

[pigor]

Re: CH341a SPI / I²C programmer

http://blog.163.com/skygz@126/blog/s...2012742153122/

NEW CH341A_1.30

[stj]

Re: CH341a SPI / I²C programmer

yes, but can you find the download?
it's not as easy as you think!

[pigor]

Re: CH341a SPI / I²C programmer

I 'm trying to find a link to download

[wacd]

Re: CH341a SPI / I²C programmer

I 'm trying to find a link to download

Any luck?
I'm still looking around for this but nothing so far.

[stj]

Re: CH341a SPI / I²C programmer

are you searching wih baidu ?

[japlytic]

Re: CH341a SPI / I²C programmer

I use a Bus Pirate, which only requires the use of a "basic" RS-232 (serial port) terminal program for communication; alternatively, other programs such as Python scripts can automate functions (such as reading/writing the EDID on the DDC bus on a particular HDMI input).

[stj]

Re: CH341a SPI / I²C programmer

bus pirate isnt $3

[megaraider]

Re: CH341a SPI / I²C programmer

Can anybody tell me the key to register this software? I need it very urgently as a W25Q64FV chip is here waiting to be reprogrammed, in old versions there in the list I can see only W25Q64BV.

AFAICT you can use the CH341a to program the W25Q64FV, setting manually the device to the W25Q64BV.
They are fully identical except for the QPI support on the later one.
Since they both support standard, dual and quad SPI - the protocol/interface CH341a uses to program this devices - will therefore work.

(Not sure what bug was fixed with W25Q64FV in v1.30 thought)

[megaraider]

Re: CH341a SPI / I²C programmer

If you want the latest version you should read this
Group Buy: CH341A Programmer

[stj]

Re: CH341a SPI / I²C programmer

so someone from the group share the software!

[pigor]

Re: CH341a SPI / I²C programmer

Free CH341A_1.29 http://rghost.ru/8RFdNVVQW

[vuthaonguyen]

Re: CH341a SPI / I²C programmer

Free CH341A_1.29 http://rghost.ru/8RFdNVVQW

thank you why free version. better than older version?

[fredupnow]

Re: CH341a SPI / I²C programmer

Could you direct me towards where I can find version 1.29 please.
What is necessary to register it?

o.k. for anybody who owns one of these.

there are 2 windows drivers to install.
1: a virtual comport
2: a virtual parallel port and i²c driver

then there are 2 softwares.
1: the memory programmer
2: the AVR microcontroller programmer

now as far as the memory programmer goes, the versions upto 1.18 just work
versions from 1.20 onwards need to be registered.

and i have 1.18 and 1.29 if anybody needs them.
------------------------------------------------------------------

btw, the key to finding this stuff is simply to use a chinese search engine - it's like turning on the lights in a dark room!

[stj]

Re: CH341a SPI / I²C programmer

to register it, you pay the author - insructions are in the readme.
or, try the solutions posted a few posts back