Thats pretty much sums it up what i gathered researching all night.
This is what i get from the dump file that i got from the board which i removed the CPU. SR2F1 - LA-E131P
[ATTACH=JSON]{"alt":"Click image for larger version Name:\timage.png Views:\t0 Size:\t32.3 KB ID:\t3182485","data-align":"none","data-attachmentid":"3182485","data-size":"full","title":"image.png"}[/ATTACH]...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thats bad. I have 55 of SR2F1 they're perfectly fine. Does that mean that i can not use them on consumer boards 😞...
Leave a comment:
-
Thanks for the reply. Can you suggest any workaround for this spesific issue?
If you're referring cleaning the me region with factory me firmware , i've already done that....Last edited by wacd; 01-19-2024, 01:01 PM.
Leave a comment:
-
I've tried this on two completely different motherboards , no luck. Updated CPU microcode, transferred ME Region from one to other. Looks like i'm missing something.
Leave a comment:
-
SR2ZU To SR2F1 CPU replacement
Hello friends.
Has anyone ever try and succeed replacing a consumer grade CPU with something removed from a corporate one?
I have plenty of sr2f1 cpus that are %100 in working condition , ID like to use them in consumer laptops as replacements
Is it possible-compatible / bios-wise ?...
-
Re: Need Lenovo NM-c911 bios dump
You can't program the IT8227E through kb socket because pins are not routed. You have to solder pin to pin.Or desolder the IO and program it outside....
Leave a comment:
-
Re: Tongfang GM7MG0P doesn't boot, PCH replaced. Please help!
I do believe SR40B and SRJAU PCH's went through some Revisions which caused this diversity. It's very hard to find a pch that our highness Tong Fang likes. Bu i'm not so sure its the board itself causing the problems.
Nothing happens after pushing the power button , then the board powers up after 10-20 seconds , goes up to 0.35A then shuts off.
Pinpoint identification of the problem is this :
"PCH doesn't send Chipselect signal CS0# to SPI hence can't...
Leave a comment:
-
Asus dual-rtx3070-o8g cg142p boardview
ASUS DUAL-RTX3070-O8G CG142P REV 1.00 BoardView. FZ
Hello dear colleagues.
I'm in dire need of this boardview (FZ Version) can someone please share the file.
Thank you.
-
Re: does anyone know how to convert a clevo laptop to UMA graphics only?
Try this one
Also made a clearme. You can try that one too....Last edited by wacd; 08-18-2023, 12:39 PM.
Leave a comment:
-
Re: does anyone know how to convert a clevo laptop to UMA graphics only?
Yea like i said. I used this bios editing method showed in the previous picture on many n850's never had any problem converting uma....Last edited by wacd; 08-18-2023, 07:20 AM.
Leave a comment:
-
Re: NM-C361 no VCCSA power MP2949A
We should start saving dump firmwares of MP series pmic's from working laptops.
Leave a comment:
-
Re: does anyone know how to convert a clevo laptop to UMA graphics only?
If your device works and displays image without the graphics card and the only problem is crazy fan spin / shutdown. Editing the bios could solve the problem.
Need a little more detail about the mainboard , a photo of the board would be good....
Leave a comment:
-
Re: does anyone know how to convert a clevo laptop to UMA graphics only?
I've came across the board mentioned in this thread today. FBVDDQ rail was burned up along with 4 memory chips and gpu memory controller. So i removed all of them and converted the board into an uma one. System started to exhibit shutdown issues just like any other clevo would do. I've been meaning to dig into this problem for a long time and saw that is a chance to do so. Done the editing and tested on the same model and it worked. Tested it around 52mins no shutdown, no crazy fanspin. Everything is as they...
Leave a comment:
No activity results to display
Show More
Leave a comment: