Good evening guys, having a corrupt bios file I had to download several new bios files, but when I go to load them on the XGECU T56 programmer all the folders are empty where is the error because what am I doing wrong. Please can you help me understand, thank you very much..
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Hi, I downloaded the files from here Bedcaps.net Bios section for laptops. They arrive in a folder (Unzip), I bring them back to the desktop and with the XGECU t56 programmer I go to load them but when I open the folder it doesn't find any files. I'm definitely wrong in some passages.Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
this is how they were downloadedComment
-
that second icon is strange - did somebody rename a zip file to .bin???
Comment
-
I don't know if someone has renamed the file, the fact is that when I open the XGECU T56 programmer and go into the folder it appears empty. I can't understand and I'm asking you if you can help me understand something. Thanks to everyone who attended.Comment
-
what is the file size?
Comment
-
-
The BIOS file you download is in *.zip format.
Thus, 'onedrive' and W10 will let you see the contents without extracting them (in fact they're extracted, but to a temp system folder).
Tips to answer you question:
1. download the *.zip to your hard drive (do not use 'onedrive')
2. once downloaded go to the folder where you downloaded it, select the file, then right mouse click and select 'extract'
3. only then the bios_dump.bin file will be visible in the programmer software
.Comment
-
and set windows explorer to show ALL file extensions.
Comment
-
hello,
i want to buy a new programmer mainly for use for laptops bios chips and i'm between the Xgecu T76 and the famous RT809H.
i think that T76 is faster wich makes it the best choice for using Pogo pins,i asked the support if it supports Mec ships found on some Lenovo laptops i didn't get an answer yet.
i would like some ideas and which one do you recommend?... -
Hello guys. What programmer can I use to program the EC IT8886HE? I have the TL-866II PLUS but it is not in the library, nor is any of the ITE family.
-
I have an Xgecu pro programmer and I am looking for an adapter to fit bios chip from 2015 Macbook Pro 15 inch, Board 820-00168. I have an adapter that is close but the chip is just a bit too big.
Thanks Spruce07-14-2023, 12:07 PM -
Hi Folks,
Just wanted to clear up a misunderstanding of mine (or what I expect is one). Isn't the 12V rail from the 24 pin, EPS and PCIE separated? IE if I put a power resistor on the ATX 12V pin that is not going to load, thus tell me if the EPS or PCIE rails are fine?
I was recently watching ArIs from Hardware Busters video on how to properly test ATX PSUs without using 5 figure Croma substations.
The PCB adapter he used breaks out the 12, 5 and 3.3V pins from the 24 pin and gives you banana plugs to connect to. That is a bit useless is it not? Aren't... -
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM
Comment