Hi, so I do console repairs normally, but I have a friend that needs me to reball their 2080ti GPU, does anyone have a profile for the ACHI IR PRO SC they could share. I know i my need to adjust is slightly to match my machine, I don't have any other GPUs to run a test on to build a profile. Thanks inadvance
Announcement
Collapse
No announcement yet.
ACHI IR PRO SC bga rework profile needed
Collapse
X
-
For this type of intervention, the power of the bottom heater is very important. I think your machine has an IR top heater and not an air one and this could be a problem. The profile I see seems slightly too low in terms of temperature at the end of the process. The temperature on the sides of the GPU during removal must not be lower than 235 240 degrees celsius as there are areas that absorb a lot of heat. What software do you use? can you post a photo of the machine and the bottom heater thermocouple?
Comment
-
Helo, I have just purchased the CHI IR PRO SC, termo couple standard. Before I had a chance to do any test I already have a work on it. Before I do a mess, can anyone help me out with this one please and share the prifile?
Acer KAV10 LA-7781P bosad
To desolder is a Intel's 945GSE Express Chipset
Comment
Comment