Hello,
Via Epia-EK8000EG 15GEK8AN000-A1 any chance for schematics (boardview)
Regards
k-krzych
Member
Last Activity: 04-08-2025, 11:10 AM
Joined: 08-12-2023
Location: Cotignola Italia
-
Via Epia-EK8000EG
-
Acer Nitro 17 AN17-71-56V2 (da0zgsmbae0 Rev:C)
Acer Nitro 17 AN17-71-56V2 (da0zgsmbae0 Rev:C) (intel i5)
Hello, i've been desperately searching for a schematics and boardview file for this board with no success at all.
Any help most welcome. Equivalent or similar boards?
Thank you in advance -
Hello,
Searching for schematics and boardvie for those. Any help very appreciated.
Asus K53SD REV2.1 Board: hannstar j mv-4 94v-0 e89382... -
Helo, I have just purchased the CHI IR PRO SC, termo couple standard. Before I had a chance to do any test I already have a work on it. Before I do a mess, can anyone help me out with this one please and share the prifile?
Acer KAV10 LA-7781P bosad
To desolder is a Intel's 945GSE Express ChipsetLeave a comment:
-
Thanks. I actually saw a dual supply line to this cpu on the schematic. There is another resistor there of 56ohm, just next to it. All components there, were kinda mirrored around the Nec/Tokin, and schematic seemed to confirm it. I have already placed another 56ohm and all works.
Thanks for your input.Leave a comment:
-
Leave a comment:
-
Partially solved.
Flat cables between T-Con and matrix were oxidated and there was poor contact.
After that picture came back to almost normal. You actually can see the difference between left and right side of the screen, espetially on darker tones. How can I fix this?Leave a comment:
-
Saw thisone before, but there is no way it lets me download anything. Looks like DOWNLOAD button is not working properly or the file itself under DOWNLOAD botton is unlinked. I have tried with Chrome and MS Edge.
Update.
Ok firewall from Kaspersky... Popups blocked. I managed to download
Ehh what a day.....
Thank you...Leave a comment:
-
I have taken the metal frame that holds the matrix and screen came back to normal but with horisontal this time disturbances. I have put back the metal frame and half black screen returned.
Is it a problem with T con? If so, what would be the next procedure?Leave a comment:
-
Solved point 2.
It has to be unscrewed from under the stand mount.
Please help in regards to Service manual.Leave a comment:
-
Update to point 2:
I have managed to pull off almost all clips (it was stright forward), but center bottom holds everything and I do not see anything obvious there of what I could do. Need some help there.
Solved point 2.
It has to be unscrewed from under the stand mount.
Please help in regards to Service manual.Leave a comment:
-
Hello,
I have similar problem with the same model. I do not do TVs normally, so no exparience. Could you guys help me out with two questions, please:
1. Do you have any service manual to this model that you can share (very hard to find one)?
2. How to take off the front bezel? Since I have never did it and do not have any instructions, just do not want to break something (kinda noob question :-) I can see only the strange clips on the reverse side of the bezel (on the photo).
Update ro point 2:
I have managed to pull off almost all clips...Leave a comment:
-
Samsung NP-R522 BA41-01060ALeave a comment:
-
Thanks!...Leave a comment:
-
Samsung NP-R522 resistor value near CPU
Hello everyone. Do you know the value of this resistor? Or which resistor it is on the schematic, please?...
-
Hello everyone. Do you know the value of this resistor? Or which resistor it is on the schematic, please?...
Leave a comment:
-
Thanks, some how I have found link only with bios files before. Thanks again...Leave a comment:
-
msI MS-16K51 ver:1.1 boardview
Hello,
Would anyone kindly share a boardview file of MSI MS-16K51 ver:1.1.
Thank you -
Asus ROG GA502D schematic/boardview
Hello,
I'm looking for Asus GA502D schematic/boardview.
Any help is most kindly welcome.... -
IC Interchangable Recap update 10.01.2024
Some errors fixed
Added new ICs...Leave a comment:
No activity results to display
Leave a comment: