RT809H - Old Philips IC S87C751 (80C51)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xf0439
    New Member
    • Feb 2021
    • 9
    • Spain
    #1

    RT809H - Old Philips IC S87C751 (80C51)

    Hello everyone,

    I got an very old Philips IC S87C751 that I would like to dump; unfortunately due to its old age this IC is of course not in the list for the RT809H.

    Is there anyway to add this IC manually? My experienced with the RT809H programmer is still quiet limited.
    I do see there is an CFG directory in the application folder but so far I haven't been able to find any generic instructions for setting it up.

    Hope someone can help!

    Thanks!

    Datasheet: https://pdf1.alldatasheet.com/datash...C751-1A28.html
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30998
      • Albion
      #2
      Re: RT809H - Old Philips IC S87C751 (80C51)

      does your programmer support any other 87c51 versions?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Teeheeze
          RT809H Programmer Firmware Corrupted
          by Teeheeze
          This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
          02-13-2025, 04:51 PM
        • sassan
          The new xgecu T76 vs rt809h programmer
          by sassan
          hello,

          i want to buy a new programmer mainly for use for laptops bios chips and i'm between the Xgecu T76 and the famous RT809H.
          i think that T76 is faster wich makes it the best choice for using Pogo pins,i asked the support if it supports Mec ships found on some Lenovo laptops i didn't get an answer yet.

          i would like some ideas and which one do you recommend?...
          03-06-2025, 05:36 AM
        • bembeno
          aquestion about RT809h programmer
          by bembeno
          dose RT809h programmer support the new Bios chips like 25q256jveq because i have minipro TL866 and icant programming these ics and if anyone can tell me about a cheaper programmer wich do the same job to buy it
          03-04-2023, 02:39 PM
        • STKR123
          The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
          by STKR123
          Greetings badcaps community,

          I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
          So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

          Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

          I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

          These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

          I learned that desoldering...
          10-29-2024, 06:03 AM
        • G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo
          by G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

          It does power up when pressing the power button.

          I already try the power button while plugin the plug with no result.
          Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

          Could this be an PSU or eMMC issue ?
          07-19-2025, 03:43 AM
        • Loading...
        • No more items.
        Working...