Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Equipment Usage, Soldering, Techniques, and Reviews
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 01-05-2020, 12:12 PM   #281
dicky96
Badcaps Veteran
 
dicky96's Avatar
 
Join Date: Mar 2017
City & State: Sunny Gran Canaria
My Country: Spain
Line Voltage: 220V 50Hz
I'm a: Professional Tech
Posts: 466
Default Re: Soldering station thoughts and guidelines

Danny you we crossposted so I didn't see your question

The eyepieces have a small threaded section and screw into the 'white boxes' of the microscope

The 'white boxes' can then be angled to match your inter-pupilary (if I spelt that right) distance - how far your eyes are apart.

Yeah I see that link you posted with the glasses type eye pieces. So I am pretty sure AMSZOOM will have them :-)


Crossposted again mate - here you go
https://www.eevblog.com/forum/testge...56/#msg2858556

Test Equipment reviews, teardowns, discussion, questions etc. This is the biggest T&M forum on the net, so your product has likely already been discussed, please use the Search function in the menu above first!

Last edited by dicky96; 01-05-2020 at 12:13 PM..
dicky96 is offline   Reply With Quote
Old 01-05-2020, 12:46 PM   #282
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Lightbulb Re: Soldering station thoughts and guidelines

Microsoft Sam here takes one apart for us I believe it's fairly similar to yours and others out there, even Louis's, since they all seem identical outside their brand and who sells them...

It's shockingly simple inside that can in the middle...just a bunch of prisms, so I imagine with the proper knowledge (and a little risk), you COULD stuff a display in that shell there somehow, at least enough to see it out the corner of your eye, so to say. I can't quite figure out what that single angled mirror just under the hole for the camera port is for...
__________________
Wattevah...

Last edited by Dannyx; 01-05-2020 at 12:53 PM..
Dannyx is offline   Reply With Quote
Old 01-07-2020, 09:08 AM   #283
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Question Re: Soldering station thoughts and guidelines

Taking a few steps back, I wonder if THIS is the same scope as the others of this kind floating around, just mounted on a traditional stand with a bottom-illuminated stage for slides. It's fairly cheap and I can source it locally, so if the head turns out to be the same, I could just get the boom stand....
Dannyx is offline   Reply With Quote
Old 01-07-2020, 10:41 AM   #284
diif
Badcaps Veteran
 
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 4,367
Default Re: Soldering station thoughts and guidelines

Quote:
Originally Posted by Dannyx View Post
Taking a few steps back, I wonder if THIS is the same scope as the others of this kind floating around, just mounted on a traditional stand with a bottom-illuminated stage for slides. It's fairly cheap and I can source it locally, so if the head turns out to be the same, I could just get the boom stand....
Check the magnification, 20x 40x seems high.
diif is offline   Reply With Quote
Old 01-07-2020, 11:34 AM   #285
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Default Re: Soldering station thoughts and guidelines

BTW: did the site configure itself in English at your end when you accessed it ? That's how I set it, but it could snap back to RO. Maybe they're referring to the MAXIMUM it can go up to...haven't really looked over it in detail
Dannyx is offline   Reply With Quote
Old 01-07-2020, 01:04 PM   #286
dicky96
Badcaps Veteran
 
dicky96's Avatar
 
Join Date: Mar 2017
City & State: Sunny Gran Canaria
My Country: Spain
Line Voltage: 220V 50Hz
I'm a: Professional Tech
Posts: 466
Default Re: Soldering station thoughts and guidelines

Yes it came up in English

I agree with diif. The magnification range of that microscope looks all wrong
dicky96 is offline   Reply With Quote
Old 01-07-2020, 01:11 PM   #287
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Unhappy Re: Soldering station thoughts and guidelines

Yeah, if 20x is indeed the lowest it can go down to, it's useless...too high.

THIS ONE goes down to 10x, but it's still too much I'd say and it's also more expensive, therefore defeating the purpose, since the stand is not cheap either, so I'd end up right back where I started...
Dannyx is offline   Reply With Quote
Old 01-08-2020, 03:35 AM   #288
diif
Badcaps Veteran
 
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 4,367
Default Re: Soldering station thoughts and guidelines

Yes, I think 10x is still too much. My microscope is a 1x and 2x with w5x eyepieces. It stays on the 1x position 95% of it's time.
diif is offline   Reply With Quote
Old 01-08-2020, 07:41 AM   #289
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Default Re: Soldering station thoughts and guidelines

Quote:
Originally Posted by diif View Post
Yes, I think 10x is still too much. My microscope is a 1x and 2x with w5x eyepieces. It stays on the 1x position 95% of it's time.
Isn't 1x like a magnifying glass ? Just asking...
Dannyx is offline   Reply With Quote
Old 01-08-2020, 08:04 AM   #290
diif
Badcaps Veteran
 
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 4,367
Default Re: Soldering station thoughts and guidelines

Quote:
Originally Posted by Dannyx View Post
Isn't 1x like a magnifying glass ? Just asking...
No idea, it has w5x eyepieces making 5x I think.
On the lowest setting I see 34mm across and on the highest magnification I see 13mm.
diif is offline   Reply With Quote
Old 01-08-2020, 08:08 AM   #291
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Default Re: Soldering station thoughts and guidelines

"Across" you mean like the area of the "stage" you are able to see ? We're not talking about working distance here (the distance from the lens to the stage)...
Dannyx is offline   Reply With Quote
Old 01-08-2020, 08:57 AM   #292
diif
Badcaps Veteran
 
Join Date: Feb 2014
City & State: Midlands
My Country: England
I'm a: Professional Tech
Posts: 4,367
Default Re: Soldering station thoughts and guidelines

Quote:
Originally Posted by Dannyx View Post
"Across" you mean like the area of the "stage" you are able to see ? We're not talking about working distance here (the distance from the lens to the stage)...
Yes, from one side of the stage to the other. I have a working distance of around 140mm at the 1x setting and about 120mm at the 2x setting.
diif is offline   Reply With Quote
Old 01-11-2020, 07:37 AM   #293
dicky96
Badcaps Veteran
 
dicky96's Avatar
 
Join Date: Mar 2017
City & State: Sunny Gran Canaria
My Country: Spain
Line Voltage: 220V 50Hz
I'm a: Professional Tech
Posts: 466
Default Re: Soldering station thoughts and guidelines

Hi guys

I got a reply from the seller on aliexpress AMSZoom where I bought my microscope.

I asked him how much I would have to pay for the WF 10x/20 high eyepoint eyepieces.

He has kindly offered to send me the high eyepoint eyepieces for free when I order the 0.5x adapter I need to make the camera show the same magnification on screen as I see through the microscope. That saves me paying around €30

This is despite the fact I never asked for high eyepoint eyepieces when I ordered - in fact at the time I did not know they existed.

From this experience I would really like to recommend anyone who is thinking of buying a microscope to consider buying from this seller AMSZoom on Aliexpress. His after sales service has been excellent, beyond what I would have expected.

https://www.aliexpress.com/item/4000...f-428fdd7d97a7
dicky96 is offline   Reply With Quote
Old 01-11-2020, 01:00 PM   #294
Dannyx
CertifiedAxhole
 
Dannyx's Avatar
 
Join Date: Aug 2016
City & State: Constanta
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Hardcore Geek
Posts: 2,692
Default Re: Soldering station thoughts and guidelines

That's good to know. Also, I'm surprised to see how popular the HUD discussion is over on EEV
Dannyx is offline   Reply With Quote
Old 01-11-2020, 01:15 PM   #295
dicky96
Badcaps Veteran
 
dicky96's Avatar
 
Join Date: Mar 2017
City & State: Sunny Gran Canaria
My Country: Spain
Line Voltage: 220V 50Hz
I'm a: Professional Tech
Posts: 466
Default Re: Soldering station thoughts and guidelines

It is mate. There are some good people over there
dicky96 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2020
Powered by vBulletin ®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:18 AM.
Did you find this forum helpful?